The easYgen unit has been designed and constructed solely for the intended use
described in this manual.
• Intended use requires operation of the control unit within the range outlined in the
specifications listed in ╚═▷ “8 Technical Specifications”.
• Steps to be taken for commissioning are outlined in ╚═▷ “6 Commissioning”.
• Intended use includes compliance with all instructions and safety notes presented in
this manual.
• Any use which exceeds or differs from the intended use shall be considered improper use.
• No claims for any kind for damage will be considered if such claims result from
improper use.
In the event that on supply needs to be replaced, the recommended method for changing
Power Modules is with the power off (to the module being removed and the module being inserted).
The system will tolerate this “cold swap” method without failure.
System Power-Up
If at any time during this procedure the defined or expected result is not achieved, begin system
troubleshooting.
1. Verify that the entire MicroNet Plus control system has been installed.
2. Turn on the power to one power supply and verify that the power supply’s green LED is the only
power supply LED on.
3. Turn off the power to the first power supply and turn on the power to the second power supply (if a
second power supply is present) and verify that the power supply’s green LED is the only power
supply LED on.
4. The RTN_CPUs in the chassis will not start automatically, the CPUs in the TMR chassis must
command them to start. See GAP application program for details.
AS-B814-108 Modicon 800 I/O Power Relay Out 8PT |
AEG/GOULD/MODI CON/SCHNEIDER MM-PM15-401/92 -01887-02 PANELMATE |
Schneider/AEG/ Modicon MM-08MP-001 8 Element Operator Panel MM08MP00 |
SCHNEIDER ELECTRIC/MODIC ON/AEG DR-1060-305 / DR1060305 |
Modicon AS-S985-022 Bus Module Board AEG S985 |
MODICON AEG HIGH SPEED COUNTER MODULE SCHNEIDER AS-B882-239 |
AEG Schneider Modicon Analog Input Module 140 ARI 030 10 |
AEG Modicon S61G-A00-F0V0, Servo Motor |
Modicon AEG Schneider PA-0601-000 PA0601000 91-00822-02 910082202 |
Modicon AEG Schneider MM-PMC1-300 PA-0601-300 MMPMC1300 PA0601300 |
Modicon AEG Schneider MM-PMA1-200 MMPMA1200 92-00599-00 920059900 |
AEG / MODICON AS-S908-110 REMOTE I/O PROCESSOR UNIT P/N AS-9385-001 |
AEG Modicon 557VCM73220 FactoryMate Plus Display Module 92-00915-01 Screen |
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved