ABB HBS01-CJC I/O MTUs - SD Series I/O

The HBS01-CJC the mounting base is for Singular AI03 (8-CH) RTD and AI04 (16-CH)

TC & mV Analog Input modules. The base includes a built-in RTD that can be used

for Cold Junction Compensation.

Two (2) 16-point headers on the base provide connections to either (2) pluggable

16-point terminal blocks for direct connection of field signal wires or to SPK0x_-yy

marshaling cables when field signal wires are landed on 3rd party termination hardware.

Features and benefits

• Termination for up to eight (8) 2/3/4/ wire RTDs or sixteen (16) TC / mV process

signals within a horizontal row.

• All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or

Full-size), are 100% fully compatible with each other. Thus, Singular & Redundant,

Compact or Full-size I/O modules can be mounted within a single, common HN800 I/O bus.

• Optional mechanical keying can be implemented to prevent insertion of the wrong I/O

module type.

• Latching device on the base locks the base into position on DIN-Rail.

• Industry standard 35-mm DIN rail, Horizontal row mounting.