ProSoft Technology’s Modbus® TCP/IP to Siemens Industrial Ethernet
gateway allows high speed bi-directional data transfers between
Schneider Electric® PACs and Siemens S7 and S5 PACs.
Two ports allow each protocol to reside on separate subnets, allowing
you to pass data between the two subnets without changing each
device’s IP address.

Features
Two separate Ethernet ports allow each protocol to reside on separate
subnets. This allows you to pass data between the two
subnets without changing each device’s IP address to be on the same subnet.
In addition to S7 controllers, the gateway can also be used with Siemens
S5 controllers with an appropriate interface.
Gateway includes a SD card slot (SD card optional) for storing configuration
files. This can be used for disaster recovery.
Secure module configuration via module switch (v1.04 and greater).
Up to 10.000 16-bit registers can be used to exchange large amounts of data.
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved