Autronica BS-211 REPEATER PANEL

Features

 User-friendly display and operator controls

 Backlit operating buttons. Text display suitable for night

time operation

 Surface mounting

 Designed to meet EN-54 requirements, and conforms to CE

standards

 Complies with environmental conditions of IEC-721-3-3 class 3k5

Application/Description

Repeater Panel BS-211 is identical (with the exception of an

alphanumeric keypad) to the operator panel BS-210. which is an

integrated part of the Fire Alarm Control Panel BS-200. All

alarm handling and system features can be controlled and

monitored from the panel. Configuration is not possible.

The panel is intended for the following purposes:

 Read information on events

 Accept events

 Read events in the log

The panel is menu operated on a 8-line display, with 40

characters per line.

The BS-211 panel communicates with the Fire Alarm Control

Panel BS-200. information Panels BV-210. other Repeater

Panels BS-211. Fire Brigade Panels BU-210 and Mimic Drivers

BUR-200 on an RS-485 panel bus.

Indicators

 8 x 40 character alphanumeric display

 Alarm, More alarms, Pre-alarm, Remote call, Remote

condition, Test condition, System fault, Power, Delayed

activation, Annunciator disabled, Remote call disabled

 Internal buzzer

Operator Controls

 More events, Mute panel, Silence, Reset, Prolong delay.

Activate outputs

 Keypad with navigational functions (cancel/back, enter,

directional keys (arrow up/down and left/right), Function

and select (MultiSelect) key

 Back-lit buttons and text

 Fireman’s key

Capacity

 A maximum of 8 additional panels can be freely mixed and

connected to the Fire Alarm Panel via the RS-485 Panel

Bus, including Repeater Panels BS-211. Information Panels

BV-210. Fire brigade Panels

BU-210 and Mimic Drivers BUR-200

Addressing the panel

The rotary switch on the rear side of the panel (on the left side

of the connector J13 and J14) is used to address the panel (1-9).