Autronica Controller BC-420G2

The controller serves as a connection unit for the detection loop,

alarm sounders, controls and inputs.

The controller can accommodate up to a maximum of 12 modules.

The system offers a loop driver module for detection loops and several

types of I/O modules (see optional modules below).

A maximum of 6 loop driver modules connected to each controller. 

All modules are easily plugged onto each other on a standard mounting

rail inside the unit. The controller provides connections for 2 Ethernet

ports and 2 USB host ports, and communicates with other system units

on the Ethernet-based local area network, AutroNet.

For engineering purposes, we have established kits to be equipped

according to specifications.

The controller kit includes a cabinet with a panel front, power supply module,

communication module and text foils in a chosen language.

Additionally the cabinet can be stacked with

Loop driver module BSD-310

Loop driver module H.P. BSD-311

BS-100 loop driver module BSD-330

Output module BSB-310A

Output module BSJ-310

Input module BSE-310

Input module BSE-320

An Al_Com+ stack can contain up to six loop driver modules (BSD-3xx).

By using AutroFieldBus, an additional Al_Com+ stack (with up to six additional

loop driver modules) can be added to the system.

NOTE! The AutroSafe panels are certified with the Al_Com+ modules mounted

inside the panel cabinet.

Part numbers:

116-BC-420         Controller kit

116-BC-420G2     Controller kit approved acc. to IEC 61508 SIL2