MITSUBISHI ELECTRIC INVERTER FR-D700 Global standard

INVERTER FR-D700 Global standard

• Pursuing the easy operation

• Long life and simple maintenance

• Compact and space-saving

• Supporting various applications

Mitsubishi Electric is involved in many areas including the following

Energy and Electric Systems

A wide range of power and electrical products from generators to large-scale displays.

Electronic Devices

A wide portfolio of cutting-edge semiconductor devices for systems and products.

Home Appliance

Dependable consumer products like air conditioners and home entertain

ment systems.

Information and Communication Systems

Commercial and consumer-centric equipment, products and systems.

Industrial Automation Systems

Maximizing productivity and efficiency with cutting-edge automation technology.

Safety stop function

The FR-D700 series is compliant to the EU Machinery Directive without the addition of

previously required external devices.

Operation of an external Emergency Stop device results in a highly reliable

immediate shutoff of the D700's output to the motor.

Spring clamp terminal (control circuit terminal)

•Easy wiring

Wiring is completed only by inserting wires treated

with blade terminal (max. diameter 1.5mm)

Capable of wiring without a blade terminal.

•Highly reliable

Spring structure in terminal contact section inside prevents contact fault

by vibration.

•Maintenance is unnecessary

Screw retightening is unnecessary.

Long-life design

•The design life of the cooling fan has been extended to 10

years*1. The life of the fan can be further extended utilizing the

it’s ON/OFF control.

•The design life of the capacitors has been extended to 10 years*1*2

by adopting a capacitor that endures about 5000 hours at 105°C

surrounding air temperature.

Leading life check function

•Degrees of deterioration of main circuit capacitor, control circuit

capacitor, and inrush current limit circuit can be monitored.

•Trouble can be avoided with the self-diagnostic alarm*4 that is

output when the life span is near.

Password function

Registering a 4-digit password can limit

parameter read/write.

It is effective for parameter setting protection.

FR-D700 Series

Low cost micro VFD with Mitsubishi Electric quality.

• Simple to use: The FR-D700 is perfect for a wide

range of applications

• Simple to set-up: The integrated digital setting dial

with display makes configuration fast and easy

• Simple operation: Control remotely or with the

built-in digital control

• Simple to choose: Low cost and with Mitsubishi

Electric quality ensuring long operation life

• Capacity: From 1/8 to 20 HP

• Safety stop function: Meets EN954-1 Category 3 and

IEC60204-1 Stop Category 0

• Integrated brake chopper circuit

• MODBUS RTU: Included as standard via the

RJ45 port

• 150% torque at 1Hz and 200% torque at 3Hz using

General-purpose Magnetic Flux Vector Control

• Optimum Excitation Control: For increased energy

savings when motor is not loaded

• Frequency search function: Catch a spinning load

• Dancer control: Allows position signal to control

roll tension

• Password function: For parameter setting

protection

• Internal diagnostics function: For monitoring

status of critical components

• RoHS compliant

• 10 year maintenance free design