HIMA D0 8 01 I/O modules HIMatrix systems



HIMA products give you maximum, long-term plant availability. To ensure this, we continually

modernize our product portfolio with new technologies. Compatible successor products ensure

your safety system continues to operate smoothly many years after installation. This reduces life

cycle costs, avoids unplanned downtime, and ensures investment protection for your assets.

HIQuad H41q/H51q was introduced to the market in 1997 as the third generation of central modules

for certified programmable safety systems. In 2018. the fourth generation of central modules was

introduced to ensure the sustainability of the HIQuad system family. The new central modules support

a wide variety of I/O modules from the previous generation. The combination of the reliable HIQuad I/O

modules and the new central modules is named HIQuad X. This guarantees maximum compatibility

for field installations and minimum modernization efforts.

Technical Details

Housing material: 316L stainless steel, 2mm wall thicknes

Dimensions (h/w/d): 1200x800x400mm

Protection rating: IP 66/NEMA 4X in accordance with IEC 60 529

Weight:  120–150kg (depending on equipment, not including pack aging)

Lock: Lockable with key

Mounting type:  Wall mounting

Explosion protection:  Suitable for zone 2

Cable entry systems:  2 entries for power supply, 2 entries for communication connection,

up to 96 entries for I/O cables, via a multi- cable transit system

Power supply:  100–240 VAC or 110–250 VDC

Communication:  Fiber-optic, single-mode, or copper-cable CAT 6. Ethernet 1000 BaseT

Safety Function

The remote I/O is equipped with safety-related digital inputs and outputs. The input values

on the inputs are safely transmitted to the connected controller via safeethernet. The

outputs are safely assigned their values by the connected controller via safeethernet.

Safety-Related Digital Inputs

The remote I/O is equipped with 20 digital inputs. The state (HIGH, LOW) of each input is

signaled by an individual LED.

Mechanical contacts without own power supply or signal power source can be connected to

the inputs. Potential-free mechanical contacts without own power supply are fed via an

internal short-circuit-proof 24 V power source (LS+). Each of them supply a group of 4

mechanical contacts. Figure 1 shows how the connection is performed.

ABB GKWE850100R0100 Board 81AB10C

ABB 3BSE025347R1 CI854 DP-V1 Interface Module

ABB PSTX210-600-70 Brand Soft Start Module

ABB SYMAP EC DIGITAL PROTECTION RELAY

Abb bamu-11 auxiliary measurement unit 3AUA0000109935

ABB Ref542plus Feeder Terminal Panel 110-240vdc

ABB 3C2258 Spray robot 

ABB Bamu-12 Auxiliary Measurement Unit 600 VAC

ABB ACS880-01-072A-3 Frequency Converter ACS880-01-072A-3

MFE180-04AN-060A-4-L518+N8020 ABB Inverter Brand

ABB dsax 452 remote in/out basic unit 5712289-a

ABB inverter spare power module DSMB-01C DSMB01C

ABB DSQC 679 3HAC028357-001 FlexPendant

ABB M3AA 160MLB 4 Electric Motor 

ABB 086348-001 Control Module 086348-501

ABB ACH550 AC Drive ACH550-UH-072A-4 50HP 3Ph w/ Keypad 

ABB Posus 214414 R1A Interface Card