Power Engineering 
K-JIANG
NameDescriptionContent
Current Location:

NI 5791R RF Transceiver Adapter Module

From:NI | author:Mr.Chen | Time :2025-12-23 | 158 view: | 🔊 Click to read aloud ❚❚ | Share:

The NI 5791 is an RF transceiver adapter module designed to work in conjunction with your

NI FlexRIO™ FPGA module. The NI 5791 features the following connectors and chips:

• 2-channel, 130 MS/s analog-to-digital converter (ADC) with 14-bit accuracy

• 2-channel, 130 MS/s (520 MS/s after interpolation) digital-to-analog converter (DAC)

with 16-bit accuracy

• LO input and LO output connectors to support LO sharing for multiple-channel applications

• Timing chip with clocking options from the backplane and the front panel

• Programmable attenuators

• Selectable receive and transmit filters

• The following front panel connectors:

– RX IN

– LO OUT

– CLK IN

– CLK OUT

– LO IN

– TX OUT

The NI 5791 can upconvert and downconvert RF signals ranging from 200 MHz to 4.4 GHz.

This document contains signal information and lists the specifications of the NI 5791R, which

is composed of the NI FlexRIO FPGA module and the NI 5791. This document also contains

tutorial sections that demonstrate how to acquire data using a LabVIEW FPGA Example VI

and how to create and run your own LabVIEW project with the NI 5791R.

Note NI 5791R refers to the combination of your NI 5791 adapter module and

your NI FlexRIO FPGA module. NI 5791 refers to your NI 5791 adapter module

only.

Note The NI 5791 is only compatible with the NI PXIe-796xR FPGA modules.

Note Before configuring your NI 5791. you must install the appropriate software

and hardware. Refer to the NI FlexRIO FPGA Module Installation Guide and

Specifications for installation instructions.

Note For EMC compliance, operate this device according to the documentation.

Key Features

The NI 5791 includes the following key features:

R...F.. .f..r.e..q..u..e..n..c.y.. .r..a.n..g..e..............................................200 MHz to 4.4 GHz

.I.n..s.t..a.n..t.a..n..e..o..u..s. .b..a..n..d..w...i.d..t.h......................................100 MHz

.A..D...C......................................................................14-bit dual channel at 130 MS/s

.D..A...C......................................................................16-bit dual channel at 130 MS/s, interpolated

to 520 MS/s

P...h..a.s..e.. .n..o..i.s..e..........................................................<94 dBc/Hz, 10 kHz offset, 2.4 GHz carrier

D...y..n..a..m...i.c.. .r.a..n..g..e.....................................................>105 dB

.N..o..i..s.e.. .f.i.g..u..r..e.........................................................<8 dB at 2 GHz

.E..V...M......................................................................<1.5% (RMS)

.R..e..c..e.i..v..e. .(..R..X...).. .I.P..3.................................................+1 dBm at 2 GHz

T...r.a..n..s..m...i.t. .(.T...X...). .I.P..3................................................+17 dBm at 2 GHz

  • DEIF AMC 600 Programmable automation controller with EtherCAT based I/O
  • DEIF AL8-2 Alarm panel
  • DEIF AGC 150 Hybrid Advanced Genset Controller
  • DEIF AGC 150 PMS Lite Simple power management controller
  • DEIF AGC 150 Generator Advanced Genset Controller
  • DEIF AGC 150 Remote Display Remote access and control unit
  • DEIF MVR-250 series Medium Voltage Relay
  • DEIF MVR-210 series Medium Voltage Relay
  • DEIF The SGC series
  • DEIF iE 350 Marine Highly flexible and cybersecure intelligent energy controller
  • DEIF iE 250 Marine Versatile and cybersecure intelligent energy controller for maritime applications
  • DEIF iE 150 Marine Simple and effective power management
  • DEIF iE 650 PLC Extreme robust Programmable Automation controller with EtherCAT based I/O
  • DEIF iE 350 PLC Robust right out of the box
  • DEIF iE 250 PLC Versatile and modular intelligent energy PLC controller
  • DEIF XL / BW / BRW-2 Illuminated indicators
  • DEIF SGC 120/121 Single Genset Controllers
  • DEIF Load Sharing Unit LSU-112DG
  • DEIF Automatic Genset Controller AGC-4
  • DEIF DU-2/MKIII Paralleling And Protection Unit 24VDC
  • DEIF AGC-4 Mk II Generator Set Automatic Controller
  • DEIF GPU-3 graphics card Generator protection unit
  • DEIF SGC 410 Single Genset Controller
  • DEIF SGC 110 Single Genset Controller
  • DEIF MTR-3 Multi-sensor
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA 22121 Output modules
  • HIMA 22120 Output modules
  • HIMA 32110 Relay Amplifier – SIL 4 Certified Safety Module
  • HIMA 32103 Relay Amplifier – SIL 4 Certified Safety Module
  • HIMA 32102 Relay Amplifier – SIL 4 Certified Safety Module
  • HIMA 32102 Relay Amplifier – SIL 4 Certified Safety Module
  • 32100 | HIMA 2 Channel Relay Amplifier
  • HIMA 42500 Selection element,2003 voting Logic function modules
  • HIMA 42400 Blocking element, direct and inverted output Logic function modules
  • HIMA 42300 OR element with 2 inputs Logic function modules
  • HIMA 42200 Element combination AND/OR/blocking element Logic function modules
  • HIMA 42100 AND element with S inputs, 1 with OR Logic function modules
  • HIMA 52100 Time Delay Module
  • HIMA 62100 984162100 2-Fold Analog Limit Monitor
  • HIMA 80110 Reset module
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01
  • HIMA HIMax®Digital Output Module X-DO 32 51
  • HIMA HIMax®Counter Module X-C1 24 51
  • HIMA HIMax®Digital Input Module X-DI 16 01
  • HIMA X-DI 32 52 Digital Input Module
  • HIMA HIMax® Analog input module X-AI 32 01
  • Beckhoff EL1904 | EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE
  • Beckhoff EL1899 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input
  • Beckhoff EL1489 | EtherCAT Terminal, 16-channel digital input
  • Beckhoff ED1889 | EtherCAT Terminal, 16-channel digital input
  • Beckhoff EL1889 | EtherCAT Terminal, 16-channel digital input
  • Beckhoff EL1872-0010 | EtherCAT Terminal, 16-channel digital input
  • Beckhoff EL1872 | EtherCAT Terminal, 16-channel digital input
  • Beckhoff EL1862-0010 | EtherCAT Terminal, 16-channel digital input
  • Beckhoff EL1862 | EtherCAT Terminal, 16-channel digital input
  • Beckhoff ED1859 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff EL1859 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff EL1852 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff ED1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, push-in
  • Kollmorgen S200 Series S20350-VTS SERVO DRIVE
  • Kollmorgen ServoStar CD CR06250 PRD-0030000z-45 , 1.4/2.2KVA Servo Drive Rev M
  • KOLLMORGEN AKD-P02407-NBEC-0000 Servo Drive
  • Kollmorgen ME2-405-B-A2 Goldline Servomotor-Encoder Commutated
  • KOLLMORGEN AKD-P00606-NBCC-I000 SERVO DRIVE
  • Kollmorgen MV65WKS-CE310/22PB Servo Drive Control Module 220v 22a
  • KOLLMORGEN SERVOSTAR 303 S3036 1-SE SERVO DRIVE
  • Kollmorgen S20360-VTS-021 Servo Drive
  • Kollmorgen MMC-SD-1.0-230-D (M.3000.0912) MMC Motion Control
  • Kollmorgen PRD-B040SAIZ-63 SERVO DRIVE CB06550
  • GE PQMII-T20-C-A Power Quality Meter
  • Eaton XV100-BOX-E4-DC1 EasyE4 Nano PLC, Starterset with DC Power supply
  • Eaton EASY-E4-DC-4PE1P easy programmable relays
  • Eaton EASY-E4-AC-12RCX1P easy programmable relays
  • Eaton EASY-E4-AC-12RC1P easy programmable relays
  • Eaton EASY-BOX-E4-UC1 Easy Nano Programmable Logic Controller
  • Eaton EASY-BOX-E4-DC1 Easy Nano Programmable Logic Controller
  • Eaton EASY-BOX-E4-AC1 easy programmable relays
  • Eaton XN-322-18PD-P Power feeder and distribution modules
  • Eaton XN-322-18PD-M Power feeder and distribution modules
  • Eaton XN-322-4PS-20 Power feeder and distribution modules
  • Eaton XN-322-1CNT-8DIO Technology modules
  • Eaton XN-322-1DCD-B35 Technology modules
  • Eaton XN-322-2DMS-WM Technology modules
  • Eaton XN-322-8AIO-U2 Analog input/output module
  • Eaton XN-322-8AO-U2 Analog output module
  • Eaton XN-322-4AI-PTNI Analog input modules
  • Eaton XN-322-10AI-TEKT Analog input module
  • Eaton XN-322-8AI-I Analog input modules
  • Eaton XN-322-7AI-U2PT Analog input modules
  • Eaton XN-322-12DO-P17 Digital output modules
  • Eaton XN-322-16DO-P05 Digital output modules
  • Eaton XN-322-20DI-PCNT Input/output modules
  • Eaton XN-322-20DI-PF Input/output modules
  • Eaton XN-312-GW-CAN Gateway modules
  • Eaton XN-322-20DI-PD Input/output modules
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff EL1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, positive/ground switching, push-in
  • Beckhoff EL1429 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-DCS2000-E Digital Integrated System Manager
  • Automotion LC4A00010 DC BL Motor Control, ATS, Sub Assy, SCP, 115VAC
  • 500T-115VAC - VAS ENGINEERING - DORIC 500 SERIES DIGITSL TEMP INDICATOR - MODEL
  • ABB XZ C828 A101 Didt Dioder Snubber 3BHE039453R0101
  • ABB 3BHB027232R0001 1-Phase Charging Transformer
  • ABB 3BHE006412R0101 Circuit Board UFC762AE101
  • ABB XVC770BE101 3BHE021083R0101 Circuit Board
  • ABB 3BHE024747R0101 GD C801 A 3BHE024748 P104 high-voltage board
  • ABB 3BHE021887R0101 UBCC717BE101 Board 3BHB002751R0102
  • ABB 3BHE032593R0001 Isolated Power Supply
  • ABB 3BSC610023R0001 POWER SUPPLY SD812
  • Beckhoff ED1837 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff EL1417 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff EL1409 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1808 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, 2-wire connection
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1722 | EtherCAT Terminal, 2-channel digital input, 120…230 V AC, 10 ms, without power contacts
  • Beckhoff EL1712-0020 | EtherCAT Terminal, 2-channel digital input, 120 V DC, 3 ms
  • Beckhoff EL1712 | EtherCAT Terminal, 2-channel digital input, 120 V AC/DC, 10 ms
  • Beckhoff EL1702-0020 | EtherCAT Terminal, 2-channel digital input, 220 V DC, 3 ms
  • Beckhoff EL1702 | EtherCAT Terminal, 2-channel digital input, 120…230 V AC, 10 ms
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz