MicroNet controls require a fixed wiring installation for ac applications. Ground leakage exceeds 3.5 mA
AC. Maximum ground leakage for ac installations is 7.2 mA at 60 Hz. A ground conductor connected to
the chassis is required for safety. The power supply grounding terminal(s) should also be connected to
earth to ensure grounding of the power supply printed circuit boards. The grounding conductor must be
the same size as the main supply conductors.

Branch circuit fuses, circuit breakers, and wiring must meet appropriate codes and authorities having
jurisdiction for the specific country (CE, UL, etc.). See Table 4-4 for maximum recommended fuse or
breaker ratings. Do not connect more than one main power supply to any one fuse or circuit breaker. Use
only the wire sizes specified in Table 4-4 which meet local code requirements. Time delay fuses or circuit
breakers must be used to prevent nuisance trips.
Power requirements depend on the number and type of modules supplied for each system. For a system
with a single I/O chassis, size the input power source according to the rating of the MicroNet power
supply to which the source is connected. Do not size the supply mains for the sum of the MicroNet power
supply ratings when redundant supplies are used. MicroNet supplies are redundant when installed in the
same chassis. Redundant supplies share the load between them equally, but each must provide for full
load in the event that one of the units is disabled. Table 4-4 gives the maximum overload protection for
supply mains connected to any single or redundant pair of MicroNet main power supplies. It is not
recommended that both MicroNet main power supplies of a redundant pair be connected to a single
source, since failure of that source would disable the system.
AEG Modicon DEA 202-B+DAP 216+DAU 208+DEP 220
CGC07-80T Servo Motor, Modicon, AEG, Gettys, Gould, 120-167-301
AEG Modicon Micro 110CPU612 03+ DEP 217, DAP 217(2units), DAP 208(2units)
AEG Modicon PC-A984-141 CPU 8K Memory
Gould Modicon AEG Circuit Board AS-516P-008_AS 516P008_Rev C25_PCB C516-000 Rev C
Gould Modicon AEG Circuit Board AS-509P-003 AS509P003 Rev A7
AEG SCHNEIDER TSXSCM2222 TELEMECHANICAL INTERFACE MODULE SCM 22V:2.1 MODICON
TELEMECANIQUE MODICON AEG AUTOMATION TCCX1730LW 8 LI LCD OP PANEL UTW
AEG MODICON MM-PMC2-100 110VA PANELMATE PLUS
AEG Modicon Modbus Plus Network Adapter Module AS-S985-802 Model #: AM-S985-800
Schneider AEG Modicon AS-B864-001 Register Output Module ASB864001
Modicon 170 BDM 342 00 I/O Mobus Plus TIO 24 VDC In/Out AEG Schneider Automation
AEG SCHNEIDER AUTOMOTION, 170 BDI 34 200, MODICON MODBUS PLUS TIO
AEG Modicon - P/N: PC-0984-145 - CPU 8K Memory With MB Plus
AEG GOULD MODICON PLC INPUT MODULE MODEL DEP2166728-042 244630
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved