The power supplies can only be installed into slots PS1 (power supply #1) and PS2 (power supply #2). If
redundant power supplies are not needed, blanking plates must be installed in the slots not being used.
Branch circuit fuses, circuit breakers, and wiring must meet appropriate codes and authorities having
jurisdiction for the specific country (CE, UL, etc.). See Table 4-3 for maximum recommended fuse or
breaker ratings. Do not connect more than one main power supply to any one fuse or circuit breaker. Use
only the wire sizes specified in Table 4-3. which meet local code requirements. Time delay fuses or circuit
breakers must be used to prevent nuisance trips.
Power requirements depend on the number and type of modules supplied for each system. For a system
with a single I/O chassis, size the input power source according to the rating of the MicroNet Plus power
supply to which the source is connected. Do not size the supply mains for the sum of the MicroNet Plus
power supply ratings when redundant supplies are used. MicroNet Plus supplies are redundant when
installed in the same chassis. Redundant supplies share the load between them equally, but each must
provide for full load in the event that one of the units is disabled. Table 4-3 gives the maximum overload
protection for supply mains connected to any single or redundant pair of MicroNet Plus main power
supplies. It is not recommended that both MicroNet Plus main power supplies of a redundant pair be
connected to a single source, since failure of that source would disable the system.
Woodward Standard MicroNet+ Kit, 8-Slot, 2 220 VAC PS, Relay Drivers 8262-3184
Woodward Standard MicroNet+ Kit, 8-Slot, 2 220 VAC PS, Relays 8262-3181
Woodward Standard MicroNet+ Kit, 8-Slot, 2 24 VDC PS, Relays 8262-3182
Woodward ASC1 (Anti Surge Control) ASC1 Core Software 5418-3675
Woodward PFC (Performance Control Core) PFC Core Software 10-028-721
Woodward LSC (Load Sharing Control) LSC Core Software 10-024-831
Woodward Standard MicroNet+ Kit, 8-Slot, 2 24 VDC PS, Relay Drivers 8262-3185
Woodward Standard MicroNet+ Kit, 8-Slot, 2 120 V AC/DC PS, Relays 8262-3180
Woodward ASC2 (Anti Surge Control) ASC2 Core Software 5418-3676
Woodward ASC3 (Anti Surge Control) ASC3 Core Software 5418-3677
Woodward ASC4 (Anti Surge Control) ASC4 Core Software 5418-3678
Woodward STC (Steam Turbine Core) STCXT Core Software 10-027-206
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved