SYMAP® is easy to program and operate. A large graphic LCD with optional LED indicators conveys
important data such as position of all connected breakers, parameter settings, and event histories
at a glance. Graphics and measurements are displayed side-by-side on the LCD, so that the user does
not have to switch between pages.

The drive monitors the motor status continuously, also during flux braking.
Therefore, flux braking can be used both for stopping the motor and for changing the
speed. The other benefits of flux braking are:
• The braking starts immediately after a stop command is given. The function does
not need to wait for the flux reduction before it can start the braking.
• The cooling of the induction motor is efficient. The stator current of the motor
increases during flux braking, not the rotor current. The stator cools much more
efficiently than the rotor.
• Flux braking can be used with induction motors and permanent magnet
synchronous motors.
Two braking power levels are available:
• Moderate braking provides faster deceleration compared to a situation where flux
braking is disabled. The flux level of the motor is limited to prevent excessive
heating of the motor.
• Full braking exploits almost all available current to convert the mechanical braking
energy to motor thermal energy. Braking time is shorter compared to moderate
braking. In cyclic use, motor heating may be significant.
Schenck Process VSE20100 Disocont Module w/Mount V000413.B01 Software
Schenck Process VSE20100 Disocont Module w/Mount VLW20150.01 Software
Schenck VET010V Ethernet Module Board w/ Mounting Hardware NWB
Schenck Vibroport 30 - Portable Vibration Analyzers & Field Balancer - PF86
SCHENCK 5AP920.1505-K1 1 OPERATOR INTERFACE PANEL
SCHENCK DNG-100 DNG100 RACK ID61300 UP TO 24 MONTHS WARRANTY
SCHENCK VC-1000-CV110 / VC1000CV110
Schenck VEG20610/VDB20 600
Schenck | VD-5310 |/Refurbish ed
SCHENCK VRS20300 Vibrating screen coil
SCHENCK VCU20104 / VCU20104
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved