Beckhoff ELX3152-0090 | EtherCAT Terminal, 2-channel analog input, current

The ELX3152-0090 analog input terminal allows the direct connection of

intrinsically safe field devices located in hazardous areas classified zone

0/20 or 1/21. It supplies measuring transducers located in the field and

transmits their analog measuring signals electrically isolated to the

automation device. The measuring range can be switched between 0...20

mA and 4...20 mA by software.

With a technical measuring range of ±107% of the nominal range, the

terminal also supports commissioning with sensor values in the limit range

and evaluation according to NAMUR NE43. The error LEDs indicate an

overload condition and wire breakage. The error LEDs indicate an overload

condition and wire breakage.

With the aid of the TwinSAFE SC technology (TwinSAFE Single Channel) it

is possible to make use of standard signals for safety tasks in any network

or fieldbus. To do this, EtherCAT I/Os from the areas of analog input,

position measurement or communication (4… 20 mA, incremental encoder,

IO-Link, etc.) are extended by the TwinSAFE SC function.

The properties typical for the signals and the standard functions of the I/O

components are retained. TwinSAFE SC I/Os differ optically from standard

I/Os by a yellow stripe on the front of the housing.

The TwinSAFE SC technology enables communication via a TwinSAFE protocol.

These connections can be distinguished from the usual secure communication

via Safety over EtherCAT.

The data from the TwinSAFE SC components is fed via a TwinSAFE protocol

to the TwinSAFE Logic, where it can be used in the context of safety-relevant

applications. Detailed examples confirmed/calculated by the TÜV SÜD for the

correct application of the TwinSAFE SC components and the respective

normative classifications can be found in the TwinSAFE application manual.