ENOTEC ENSITU® 7000 The compact O2 analyzer with integrated electronics

Developed for maximum cost efficiency

• Plug & play

• Electronics installed directly on the sensor

• Instrument air is NOT required

• All functions controllable and storable via ENOTEC Remote APP

Technical data

Process gas temperature max. 600 °C

Measuring principle O₂ Zircon oxide

Immersion depth/material 313 mm to 993 mm (others on request)

/ Stainless steel (SS316TI)

Ambient temperature Probe: -40°C to +55°C | Electronics: -40°C to +70°C

O₂ - Measuring ranges Two freely selectable measuring ranges: 0-2 vol.%

to 0-25 vol.% (others on request)

Housing Probe: IP65 | Electronics: IP66

ENSITU 7000. ENOTEC's affordable entry-level product, is based on

decades of experience. Development, design, and manufacturing take

place exclusively at the German headquarters – from the sensor to the

software. ENSITU 7000 enables fast and continuous measurement and

is capable of withstanding flue gas temperatures up to 600°C and high

dust loads. Versatile and robust, this new ENOTEC analyzer is the ideal

solution for process control in small to medium-sized boilers using all

applicable fuels, such as gas, oil, and coal. The ENSITU 7000 requires

no calibration or instrument air and is ready for immediate use.

The ENSITU 7000 measures in situ: The flue gas flows directly through

the large filter with a V-shield, so the O₂ sensor reacts immediately to

changes in oxygen concentration, eliminating the need for flue gas

extraction or downstream gas treatment.

Features: Plug & Play Operation

• Innovative operating concept

• Ready for immediate use

• Easy integration into existing boiler concepts

• Electronics detachable from the probe via a robust industrial connector