ENOTEC AQUATEC® 1000 Safe and robust O₂ & H₂O measurement directly in the drying process

Developed to optimize the drying process

Measuring range up to 100% H₂O and O₂

Robust probe design for high drying temperatures

Dual system configuration allows measurement in special drying processes

Drying processes are among the most energy-intensive steps in manufacturing

processes, whether it's the production of plasterboard or the processing of

tobacco plants. Fast and reliable measurements during the drying process

reduce the time required and allow for optimized energy use.

Due to its in-situ measurement method, the AQUATEC 1000 analyzer is superior

to conventional systems using extractive methods in terms of measurement

speed.

Sensors from ENOTEC have already proven themselves in countless applications

worldwide.

Technical data

Process gas temperature Max. 200 °C (with activated carbon filter)

Max. 400 °C (with ceramic filter)

Measuring principle O₂ Zircon oxide

Immersion depth/material Max. 615 mm (others on request) / Stainless steel

(SS316TI)

Ambient temperature Probe: -40°C to +80°C | Electronics: -20°C to +55°C

O₂ - Measuring ranges Two freely selectable measuring ranges: 0-2 vol.% to

0-25 vol.% (others on request)

H₂O - Measuring ranges 0 to 100%

Housing Probe: IP65 | Electronics: IP66