Moog BDP-Q2-50-10 2-quadrant speed controller for brushless motors

TYPICAL APPLICATIONS

Control of Brushless Motors for:

• Medical pumps and blowers

• Air-handling equipment

• Packaging and printing products

• Semiconductor handling and insertion machines

• Industrial automation equipment

• Office automation and equipment

FEATURES

• 2-quadrant speed controllers for electronically commutating three-phase

brushless motors with Hall sensors, which are arranged offset at 120

electrical degrees

• Speed of the motor is preset by means of either an internal or an external

potentiometer

• Maximum constant current can be adjusted via an on-board potentiometer

• Direction of rotation of the motor can be preset by means of the direction

control input.

The controller output stage can be activated and deactivated by means of the

disable control input

• Controller is safeguarded against heat overload by means of an internal

thermal cutoff

• Controller output stage has been constructed using POWER-MOSFET

technology, resulting in very high efficiency

BENEFITS

• Compact packaging minimizes space demands

• Matched drives and motors from a single supplier

• Complete system testing provides high reliability

• Terminal block connections for ease of wiring

• Multiple methods of speed control

- Input voltage

- Internal potentiometer

- External potentiometer

- External voltage reference

Silencer® brushless controllers are available in a variety of voltage and

current ratings. Their compact packaging minimizes space demands.

All controllers have generous terminal blocks to facilitate ease of wiring.

Silencer drives are compatible with Silencer Series Brushless DC Motors.

Silencer motors are available in sizes 12. 17. 23. 28. 34 and 42 in standard

frames with 1.2 to 4.15 inch diameters. They offer speeds up to 20.000

rpm and continuous torques ranging from 1.2 to 519 oz-in. Standard

options include gearheads, resolvers and encoders.

If you have questions about Silencer drives or would like to speak to an

applications engineer, please call us or visit our web site.