ENOTEC COMTEC® 6000 StaubEx The robust O2 & COe analyzer for measurements in ATEX Zone 21/22

The standard for use in dust explosion protection zones 21/22 is called

COMTEC 6000 StaubEx. In accordance with the stringent requirements

of operation in such dusty environments, the ATEX certification meets 

Class II 2D Ex tb IIIC T133°C/T141°C Db.

The precise determination of the proportion of oxygen and COe in the

flue gas is the starting point for the safe and optimized operation of

combustion plants, because both measurements are related.

This allows dangerous malfunctions in the process to be identified and

avoided earlier.

The COMTEC is also available for pure O₂ measurements.

Technical data

Process gas temperature max. 600 °C

Measuring principle O₂ Zirconium oxide|MXP

Immersion depth/material 540 mm to 960 mm (others on request) /

Stainless steel (SS316TI)

Measuring principle COe MXP (mixed potential)

Ambient temperature Probe: -20°C to +70°C | Electronics: -20°C to

+55°C

O₂ - Measuring ranges Two freely selectable measuring ranges: 0-2 vol.%

to 0-21 vol.% (others on request)

COe - Measuring ranges 0 to 5000 ppm

Housing Probe: IP66 | Electronics: IP66

Type of protection II 2D Ex tb IIIC T133°C/141°C Db