Remote Input Modules
Connected Via a ControlNet
Network
When remote analog I/O modules are connected to the owner-controller via a scheduled
ControlNet network, the RPI and RTS intervals still define when the module multicasts data
within its own chassis (as described in the previous section). However, only the value of the
RPI determines how often the owner-controller receives it over the network.
When an RPI value is specified for an input module in a remote chassis that is connected by a
scheduled ControlNet network, the RPI also ‘reserves’ a spot and instructs the module to
multicast data within its own chassis.

Whether the timing of this ‘reserved’ spot coincides with the exact value of the RPI, the control
system helps the owner-controller receive data at least as often as the specified RPI.
This illustration shows that the input data within the remote chassis is multicast at the
configured RPI. The ControlNet bridge module sends input data back to the owner-controller at
least as often as the RPI.
RSLogix 5000 configuration data is transferred to the controller during the program
download and later transferred to the appropriate I/O modules.
I/O modules in the local chassis, and modules in a remote chassis connected via the EtherNet/IP network,
or unscheduled connections on the ControlNet network, are ready to run as soon as the configuration data has been downloaded.
However, to enable scheduled connections to I/O modules on the ControlNet network,
you must schedule the network by using RSNetWorx for ControlNet software.
MOLEX SST-DN4-PCIE-H / SSTDN4PCIEH
SST 5136-PFB-PCI Profibus Communications Adapter Module
AMAT 0190-34511 REV. 08 SST woodhead DNet bus scanner DNPCPCI3U1-NC- 3V V1.3.4
WOODHEAD SST-DN3-PCU-1 DEVICENET INTERFACE CARD
SST / WOODHEAD 5136-PFB-VME PROFIBUS INTERFACE CARD 5136PFBVME NIB
WOODHEAD SST-DN3-PCU-2( E) PCI DEVICENET INTERFACE CARD DN3-PCU-2(E) V1.2.8
Brad Communications / Fanuc / Woodhead. SST-PFB3-VME-1 -E.
SST/Woodhead 5136-DNP-104 Interface Module DeviceNet I/O Driver
SST/Woodhead Profibus Network Interface PB3-ISA-e GEB
Woodhead SST-IBS-CLX, Interbus Scanner Module, G4 Master.
AMAT AMAT-DNP-CPCI- 1 DEVICENET PRO PCB CARD SST WOODHEAD
WOODHEAD / MOLEX SST-DN3-PCU-2E PCI DEVICENET v 1.4.0
Woodhead SST PB3-PCU-E V1.7.1 PB3-PCI-e Communication Card
SST WOODHEAD CANADA 490-1655 Printed Circuit Board Card
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved