ABB UNS4681V511 3BHE004074R0511 multi-functional industrial control module

REF611 is a dedicated feeder protection relay designed for the protection, control, measurement

and supervision of utility substations and industrial power systems.

The feeder protection relay REF611 can be supplied either with directional or non-directional 

overcurrent and earth-fault protection. 

Directional earth-fault protection is mainly used in isolated neutral or compensated networks, 

whereas the non-directional earth fault protection is intended for directly or low-impedance earthed neutral networks.

REF611 is a member of ABB’s Relion® product family and part of its 611 protection and control series of relays.

For optimized control and reliable operation of your switchyard, the REC670 is your best choice for transmission applications.

REC670 IEDs (Intelligent Electronic Device) provide control solutions for any type of switchgear and different switchgear configurations. 

The customized REC670 gives you the freedom to select the functionality entirely according to your needs. 

The pre-configured REC670 variants simplify handling since the basic functionality is included and pre-configured. 

If needed, you can add optional functions to easily increase the functionality of 

the REC670 IEDs to meet the specific requirements of your switchyard.

REC670 integrates advanced voltage control for transformers in a substation in a single IED. 

The IEDs feature a large HMI for local control and instant access to important data, 

such as settings, events and disturbance information.

The application area also covers medium-sized three phase asynchronous motors as well as 

protection and control of shunt capacitor banks used for reactive power compensation. 

In addition to protection, measurement, control, condition monitoring and general functions,

the REF 543 feeder terminals are provided with a large amount of PLC functions, 

which allow for several automation and sequence logic functions, needed for substation automation, to be integrated into one unit.

The data communication properties include the following communication standards: 

SPA bus, LON bus, IEC 60870-5-103. IEC 61850 via SPA-ZC 400. 

Profibus DPV1 via SPA-ZC 302. DNP 3.0 and Modbus communication with higher level equipment. 

Further, the LON communication together with the PLC functions minimizes the need for hardwiring between the feeder terminals.