ABB SUE3000 1VCR007346 G0032 High Speed Transfer System

Protection functions

The IED offers directional and non-directional overcurrent and thermal overload protection as

well as directional and non-directional earth-fault protection. 

Some standard configurations allow as an option admittance-based, harmonics-based or wattmetric-based earth-fault protection to be

used in addition to directional earth-fault protection. 

Further, the IED features sensitive earth-fault protection, phase discontinuity protection, transient/intermittent earth-fault protection, 

overvoltage and undervoltage protection, residual overvoltage protection, positive-sequence undervoltage

and negativesequence overvoltage protection. 

Frequency protection, including overfrequency, underfrequency and frequency rate-of-change protection,

is offered in IEDs with standard configurations H and J. 

The IED also incorporates optional three-pole multi-shot auto-reclose functions for overhead line feeders.

Enhanced with optional hardware and software,the IED also features three light detection channels 

for arc fault protection of the circuit breaker, busbar and cable compartment of metalenclosed indoor switchgear.

The arc-fault protection sensor interface is available on the optional communication module.

Fast tripping increases staff safety and security and limits material damage in an arc fault situation.

REF542plus success story

„ Market launch 2000

„ Delivered units approx. 50,000

„ Applications ranging from low voltage to high voltage

„ In service worldwide

„ Many different protection and control functions

Event recording

All events are stored with a resolution of 1 ms in the central unit and in the BUs.

System, protection and test events can be generated.

Protection events refer to the protected busbar and include the changes in the disconnector and breaker positions,

trips, etc. Test events are recorded during testing with the test signal generator.

System events describe the diagnostic and fault messages of the NBP system as a whole.

AEG Modicon R911 Hot-Standby Processor A1482AES

AEG Modicon AS-BDEP-218 DEP 218 Input Module ASBDEP218 DEP218

AEG Modicon Power Supply P930 MAP-930 SPC 15A0251-000 Rev.G NOV

AEG Modicon AS-M996-000 M996 Mass Storage Device ASM996000

AEG Modicon AS-B875-002 Analog Input Module

AEG AS-J890-001 ASJ890001 J890 MODICON J890 MODICON CPU MODULE ID131509

Schneider Automation 043 506 698 Modicon Micro 110 CPU 311 00 AEG Working

AEG MODICON PLC SYSTEM, PC-A984

AEG Modicon S908 AS-S908-000 REV B Input/Output Processor

AEG MODICON PC-CBCB-000 CLUTH & BRAKE CONTROLLER W/ AS-E60-B CARTRIDGE PCCBCB000

Schneider AEG AS-884A-211 Modicon Controller Module

AEG Modicon Brushless Servo Motor 120-082-005 120082005 12O-O82-OO5