Basler Electric SBO222 Excitation Support System

BE3 ac current relays provide current monitoring and protection in

both single-phase and three-phase systems. They are used in

applications such as motor protection, load detection, and generator

control. Undercurrent, overcurrent, and combined over/undercurrent

units are available. BE3 ac current relays operate when the

adjustable trip point is reached. A time delay control is provided with

an adjustment of 0 to 10 seconds (relay operating time is typically

200 milliseconds). This time delay may be used to prevent false

tripping when there are slight variations in the sensed current.

On overcurrent units, the output relay energizes when the input

signal exceeds the trip point. On undercurrent units, the output relay

de energizes when the input signal goes below the trip point. A red

LED indicates the state of the output relay. A green LED indicates

the condition of the power supply.

Enjoy proven, dependable, high performance with Basler Electric’s AVC line.

These extremely rugged and reliable regulators provide the performance and

functionality that revolutionized the modern analog voltage regulator market,

and they are still unrivaled today. Others have attempted to imitate the AVC’s

features and functions, but only the AVC remains the total solution.

The Electronic Manual Voltage Control MVC-300 is a solid-state

device en closed by a wrap-around metal chassis.

The MVC-300 is for mounting through a panel with controls

accessible from the front of the panel or can be mounted behind

the panel. A terminal strip located on the rear of the device

facilitates installation. A manual voltage adjust potentiometer and

a manual-off-auto switch are provided on the front face of the unit.

For use of a user-supplied external manual adjust potentiometer or

for adjust by a motor operated control (MOC), order MVC-301.

The MVC-300 and MVC-301 are designed to operate with Basler

voltage regulators powered from 120 or 240 volt AC sources up to

320 Hz. The adjustable output of the MVC-300 supplies power to 32.

63 or 125 volt fields at 7 amps.

The Basler Microprocessor-Based Reference Adjuster, Model RA-70.

replaces Motor Operated Potentiometers and provides a totally solid

-state method of adjusting the setpoint on Basler Automatic Voltage

Regulators (AVRs), Basler Shunt Static Exciter-Regulators (SSEs),

Basler Manual Voltage Controls (MVCs), the Basler Var/Power Factor

Controller (SCP-250) and other input devices having a rheostat or

potentiometer type control adjustment. The unit is designed for

"behind-the-panel" mounting in switchgear or control boxes.

All controls, inputs, outputs, and LED indicators are located on the

unit's front panel for ease of installation and adjustment.

The RA-70 Reference Adjuster also comes equipped with a 0-1 mA

output signal to operate a position indicator that will indicate the

setpoint position.

A terminal voltage limiter within the IFM-150 can be enabled to

monitor the generator voltage through the  synchronizing

transformer or external voltage transducer and compare the

measurement with a user adjustable reference level.

If the generator voltage exceeds the reference level for a user

-adjustable amount of time, the IFM-150 will modify the SCR

firing pulses and limit the generator voltage.

Basler Electric 9289902106 Circuit Board Rev A

Basler Electric 9105100106 UFOV-250A Under Freq./Overvoltage Protector

Basler Electric BE1810/U-2 Solid State Frequency Relay BE1810

Basler Electric BE1-67 Ground Directional Overcurrent Protective Relay

Basler Electric 1783 Be1783 Contactor Dc Current Transformer Coil, 1200:5A Ratio

Basler Electric BE25927001 Current Transformer - 1:34 Amp - Tested/1Yr Warranty

Basler Electric BE1-25/ BE1-25M1GA6PN4R3F STOCK G277

Automatic Voltage Regulators DECS100-B15 For Basler Electric Generator

Basler Electric BE3-47N/27-3A4N2 9320400101 120V

Basler Electric Solid State Protective Relay BE1-60

Basler Electric SSR 63-12 STATIC VOLTAGE REGULATOR 600VAC 50/60HZ 9 1859 00 101

Basler Electric SR8A2B01A3E Static Voltace Regulator

Basler Electric PCB Assembly 9059701100 919620

Basler Electric F3EE1PA0N1F BE1-40Q

Basler Electric BE1-81-O/UT3ED1JB6N0F / BE181OUT3ED1JB6N0F

Basler Electric KR2FF-M Voltage Regulator 9 1163 00 103