POT 16 Operator keypad POT 16 H&B Contronic

POT 16 Coupler Module Manufacturers ABB, Hartmann & Braun Model(s)

ABB H&B Contronic, ABB H&B Contronic P

Estimated Shipping Size Dimensions: 4.0" x 3.0" x 8.0" (10.2 cm x 7.6 cm x 20.3 cm)

Weight: 0 lbs 10.1 oz (0.3kg ) POT 16

Country of Origin: Germany Ships from Webster NY, USA PCZ 23

The two coils - individually energised - allow the drive mobile armature

to be moved from one of the two stable positions to the other.

The drive shaft is solid with the mobile armature and held in position

in a field generated by two permanent magnets (fig. A).

Energising the coil opposite to the magnetic latching position (fig.

A) of the core, the magnetic field is generated (fig. B), which attracts

and moves the mobile armature into the opposite position (fig. C).

Consumption is therefore minimal. The power required is less than

5 W. In order to re-instate the rated power value in the capacitor

after an operation, there is an inrush of 15 W for a duration of a few

tens of milliseconds. For the reasons indicated above, both for the

DCO and for the SCO version it is necessary to supply the auxiliary

circuits which recharge the capacitor with a continuous auxiliary

power supply of 5W (this value can reach 15W for a few milliseconds

immediately following each operation). Careful selection of the

components and a precise design make the electronic multi-voltage

feeder extremely reliable, unaffected by electromagnetic interference

generated by the surrounding environment and free of any emissions

which may affect other apparatus placed in the vicinity.

These characteristics have made it possible for the V-Contact VSC

contactors to pass the electromagnetic compatibility tests (EMC)

and obtain the CE mark.

ABB-TK502

ABB-DM-KEY

ABB-DM-PREM

ABB-DM-PREM-UPGR

ABB-DM-TOOL

ABB-DM-TOOL-UPGR

ABB-PM572+DM-TOOL

ABB-PM573_ETH+DM-TOOL

ABB-PM582+DM-TOOL

ABB-PM583_ETH+DM-TOOL

ABB-PM590_ETH+DM-TOOL