Emerson IC758RSWB10PC128 Replacement Back for 10" RXi- Panel Pc Emerson Bezel-8GB RAM, 128GB SSD

With DeltaV SIS process safety system, events are automatically generated as

function blocks are executed within a module scan. Events are time stamped 

with a resolution of <1 ms,and they are recorded in the sequence that they occur in the

Event Chronicle. When using standard function blocks such as input blocks,

|voter blocks, and cause and effect blocks, a standard set of events are

automatically generated without special configuration or programing required.

For example,I/O failures, trip limits, first outs, and other similar events are automatically

time stamped by function blocks and recorded in the Event Chronicle.

When a process variable exceeds the trip limit, DeltaV SIS records the event along

with the analog value and the trip condition.

In general, when there is a plant event that triggers anemergency shutdown from the SIS,

one input will exceed a trip limit on one scan and this will cause outputs to trip and

more inputs will then change state. Sequence of Events Recording has been

used to find that first input that caused the trip by looking at all of the inputs in the plant.

With the DeltaV SIS system, the operator simply filters the Event

Chronicle for first out trips, and the first-out is clearly visible.

If higher resolution is required for some channels then they canbe wired to both

the DeltaV SIS Logic Solver and also to a DeltaV Discrete Input Card for Sequence

of Events, which provides a resolution of 0.25 ms.

The redundant SLS 1508 Logic Solver modules are connectedto the field at the redundant

terminal block. No control strategy configuration is required to take advantage

of SLS 1508 Logic Solver redundancy, as the system’s auto-sense capability

automatically recognizes the redundant pair of Logic Solvers.

An integrity error alarm in a redundant SLS 1508 Logic Solver pair will notify

the operator of a failure. Both SLS 1508 Logic Solvers in a redundant pair

are monitored for integrity alarms at all times.

Events that can cause integrity alarms include:

• Hardware failure within a SLS 1508 Logic Solver

• Communications failure between a SLS 1508 Logic Solver and the SISNet

• Communications failure between a redundant pair of SLS 1508 Logic Solvers

• Communications failure between a SLS 1508 Logic Solver and an DeltaV Controller

• Removal of a SLS 1508 Logic Solver from the carrier

EMERSON FLOBOSS S600 Flow Computer

EMERSON DA7281520 P152 Particulate Matter Monitor

EMERSON P152.R4 Temperature Sensor Module

EMERSON TPMC917 standard single-width 32-bit pmc module

EMERSON VE3008 CE3008 KJ2005X1-MQ1 12P6381X042 MQ Controller

EMERSON VE3008 CE3008 KJ2005X1-MQ1 12P6381X022 MQ Controller

EMERSON A6824R ModBus and Rack Interface Module

EMERSON P188.R2 Shaft Relative Vibration Monitor

EMERSON A6370D/DP Overspeed Protection Monitor

Emerson VE4012S2B1 DeltaV™ M-series Traditional I/O

EMERSON KJ4006X1-BD1 Interface Terminal Block

EMERSON FX-316 960132-01 Positioning servo drive