Emerson IC758CSWA24PC64 24" RXi -Panel PC merson Bezel-4GB RAM, 64GB SSD

The RX3i universal backplane and Series 90-30 expansion/remote racks support the Series 90-30

Genius Bus Controller and Motion Control modules, and most Series 90-30/RX3i discrete and analog

I/O with catalog prefixes IC693 and IC694. RX3i modules with catalog prefixes IC695. including the

Ethernet and other communications modules can only be installed in the universal backplane. See the

PACSystems RX3i System Manual, GFK-2314 for a list of supported modules.

RX3i supports hot standby (HSB) CPU redundancy, which allows a critical application or process to

continue operating if a failure occurs in any single component. A CPU redundancy system consists of

an active unit that actively controls the process and a backup unit that is synchronized with the active

unit and can take over the process if it becomes necessary. Each unit must have a redundancy CPU

(See section 2.2 for CPUs that support redundancy).

Product Description

FOUNDATION™ fieldbus I/O is a modular subsystem that communicates digitally with field devices, 

increases your input/output capacity, and gives you access to more information about your process than conventional I/O subsystems. 

It greatly enhances device diagnostics that affect your control strategy and alerts operators to device malfunctions. 

If you want an efficient, economical, and secure process control system, use DeltaV™ FOUNDATION fieldbus I/O.

Maximize smart device capabilities. Increase your quality and throughput by taking advantage of the added diagnostics

of FOUNDATION Fieldbus I/O devices. Field device status is updated continuously using FOUNDATION Fieldbus I/O.

For multi-variable devices, all process variables are available on the single fieldbus at the cost of a single Device Signal Tag.

Redundant H1 cards provide increased availability.

The DeltaV system offers redundant H1 interfaces. The two H1

interfaces are connected with a redundant terminal block to

provide back-up link active schedule (LAS) capability that also

maintains communication with the host system. 

Transfer to the standby card is automatic and requires no special configuration.

Ongoing diagnostics ensure the standby H1 card is available on demand. 

This process requires no user interaction.

Recommended Products P/N：

MOLEX WOODHEAD DEVICENET SST-DN4-PCI SST-DN4-PSU V2.0.2 INTERFACE CARD

SST Woodhead 5136-DNP-ISA-2 DeviceNet Pro ISA Two Channel Board

WoodHead Cord Reel & Lamp SET 3778 832722FU-09 DANIEL WOOD HEAD

Woodhead SST ControlNet Card CN-104-E

AMAT 0190-16926 REV. 001 SST woodhead DNet bus scanner DNPCPCI3U1-NC- 3V V1.3.4

WoodheadSST-PF B-CLX PROFIBUS DP Remote I/O Scanner Module

Woodhead Canada Limited / SST 5136-DNP-PCI DeviceNet Pro PCI Adapter

Woodhead | SST-DNP-104-2 |/Refurbish ed

WOODHEAD SST Profibus SST-PFB-PLC5 Profibus Scanner

Emerson Ovation 5X00105G10 Control Board

Emerson Ovation 5X00105G03 Control Board

Emerson Ovation 5X00105G01 Control Board

Emerson Ovation 1C31234G01 Contact Input Module

Emerson Ovation 1C31142G01 Contact Input

Emerson Ovation 5A22727G03 Consumables Kit

Emerson Ovation 5A22727G02 Consumables Kit

Emerson Ovation 4D33942G02 Chassis/Metalwork/Fan

Emerson Ovation 4D33942G01 Chassis/Metalwork/Fan

Emerson Ovation 1X00377H01 Cable Management Bar

Emerson Ovation 5A26141G05 Cable Controller to Transition Panel

Emerson Ovation 5A26137G04 Cable