Beckhoff ELM3104-0030 | EtherCAT Terminal, 4-channel analog input, current

The ELM310x EtherCAT Terminals are designed for flexible current

measurement in the range from -20 to +20 mA. They offer 

selectable measuring ranges of -20/0/4 to ±20 mA as well as current

measurement according to NAMUR NE43.

The measuring range is selected in the CoE, as are the other setting

options such as the filter parameters. Irrespective of the signal

configuration, all ELM modules have the same technological properties.

The ELM310x modules for current measurement offer a maximum

sampling rate of 10.000 or 20.000 samples per second.

The 2-pin plug (push-in) can be removed for maintenance purposes

without releasing the individual wires.

This terminal is also available as a variant with an individual calibration

certificate. (See related products) Extensive documentation is available

from Beckhoff sales, support or measurement@beckhoff.com.

This ELM3xxx series measurement terminal enables efficient

implementation of complex system-integrated data acquisition systems

(DAQ) that place high demands on measurement accuracy and time

synchronization.

The ELM310x EtherCAT Terminals are designed for flexible current

measurement in the range from -20 to +20 mA.

They offer selectable measuring ranges of -20/0/4 to ±20 mA as

well as current measurement according to NAMUR NE43.

The measuring range is selected in the CoE, as are the other setting

options such as the filter parameters. Irrespective of the signal

configuration, all ELM modules have the same technological properties.

The ELM310x modules for current measurement offer a maximum

sampling rate of 10.000 or 20.000 samples per second.

The 2-pin plug (push-in) can be removed for maintenance purposes

without releasing the individual wires.

This terminal is also available as a variant with an individual calibration

certificate. (See related products) Extensive documentation is available

from Beckhoff sales, support or measurement@beckhoff.com.

This ELM3xxx series measurement terminal enables efficient

implementation of complex system-integrated data acquisition systems

(DAQ) that place high demands on measurement accuracy and time

synchronization.

The ELM3002-0325 EtherCAT Terminal in the basic series is designed

for low-voltage measurement in high-voltage systems (AC or DC),

especially current measurement via shunt or single-cell measurement.

It has an adjustable measuring range of ±60 mV to ±5 V per channel

and electrical isolation between the channels.

The measuring range is selected in the CoE, as are the other setting

options such as the filter parameters. Regardless of the signal

configuration, all ELM modules have the same technological properties,

and the ELM3002-0325 with oversampling offers a maximum sampling

rate of 50.000 samples per second and channel.

The terminal is equipped with 4 mm laboratory sockets.

The individual Beckhoff factory calibration certificate can be downloaded

via Beckhoff Service.

here for each device. Recalibration (ZS9001) is possible 

Extensive documentation is available from Beckhoff sales, support or

measurement@beckhoff.com.

This ELM3xxx series measurement terminal enables efficient implementation

of complex system-integrated data acquisition systems (DAQ) that place

high demands on measurement accuracy and time synchronization.