Basler Electric BE25927001 Current Transformer

The Basler Microprocessor-Based Reference Adjuster, Model RA-70.

replaces Motor Operated Potentiometers and provides a totally solid

-state method of adjusting the setpoint on Basler Automatic Voltage

Regulators (AVRs), Basler Shunt Static Exciter-Regulators (SSEs),

Basler Manual Voltage Controls (MVCs), the Basler Var/Power Factor

Controller (SCP-250) and other input devices having a rheostat or

potentiometer type control adjustment. The unit is designed for

"behind-the-panel" mounting in switchgear or control boxes.

All controls, inputs, outputs, and LED indicators are located on the

unit's front panel for ease of installation and adjustment.

The RA-70 Reference Adjuster also comes equipped with a 0-1 mA

output signal to operate a position indicator that will indicate the

setpoint position.

A terminal voltage limiter within the IFM-150 can be enabled to

monitor the generator voltage through the  synchronizing

transformer or external voltage transducer and compare the

measurement with a user adjustable reference level.

If the generator voltage exceeds the reference level for a user

-adjustable amount of time, the IFM-150 will modify the SCR

firing pulses and limit the generator voltage.

The BE1-CDS240 Current Differential System is an economical,

microprocessor based, multifunction system that provides a four

input, three-phase percentage differential with harmonic restraint

protection.

Also included is three-phase with voltage control, ground, and

negative-sequence overcurrent protection, voltage and frequency

protection, breaker failure for up to four breakers, breaker monitoring

for four breakers, transformer monitoring, and metering functions,

all in an integrated system with several communications options.

The BE1-CDS240 Current Differential System is intended for use in

any low impedance current differential protection application including

transformer, generator, motor, and bus protection.

Four setting groups are provided for adaptive relaying with automatic

selection logic for cold load pickup and/or dynamic setting group changes.

The BE1-CDS240 can be ordered with 12 programmable contact sensing

inputs, 10 programmable outputs, and one alarm output or eight

programmable contact-sensing inputs, 14 programmable outputs and

one alarm output. Outputs can be assigned various functions by logical

programming to perform protection, control, or indicate operations.

Basler Electric 9289902106 Circuit Board Rev A

Basler Electric 9105100106 UFOV-250A Under Freq./Overvoltage Protector

Basler Electric BE1810/U-2 Solid State Frequency Relay BE1810

Basler Electric BE1-67 Ground Directional Overcurrent Protective Relay

Basler Electric 1783 Be1783 Contactor Dc Current Transformer Coil, 1200:5A Ratio

Basler Electric BE25927001 Current Transformer - 1:34 Amp - Tested/1Yr Warranty

Basler Electric BE1-25/ BE1-25M1GA6PN4R3F STOCK G277

Automatic Voltage Regulators DECS100-B15 For Basler Electric Generator

Basler Electric BE3-47N/27-3A4N2 9320400101 120V

Basler Electric Solid State Protective Relay BE1-60

Basler Electric SSR 63-12 STATIC VOLTAGE REGULATOR 600VAC 50/60HZ 9 1859 00 101

Basler Electric SR8A2B01A3E Static Voltace Regulator

Basler Electric PCB Assembly 9059701100 919620

Basler Electric F3EE1PA0N1F BE1-40Q

Basler Electric BE1-81-O/UT3ED1JB6N0F / BE181OUT3ED1JB6N0F

Basler Electric KR2FF-M Voltage Regulator 9 1163 00 103