CTI 2500S-27-1550 Slice I/O, RS232/485, 2DIO / 4UAI / 2AI (MATURE)

The 2500S family of Slice I/O modules expands the capability of

2500 Series® Systems to include small drops of I/O connected

over Ethernet. Slice I/O modules communicate to 2500 Series®

Processors using CAMP protocol and read/write directly to the PLC

memory or I/O image table. This allows transparent integration

into the 2500 Series® system without the requirement for any

complicated configuration step. Ethernet connection to the CPU

can be accomplished using the on-board port on 2500-Cxxx

Processors, or using a 2572 / 2572-A Ethernet module. 

Note that when using 2572 or 2572-A modules, Slice I/O can be

connected even to legacy Siemens® and Texas Instruments PLCs.

Several models of Slice I/O are available with different mixes of I/O

and with additional communications options including RS232/485

and 900MHz radio. Slice I/O modules feature Universal Analog Inputs

which allow connection of 0-5V, 0-20mA, thermocouple, and RTD

sensors. All Slice I/O modules can also be configured to communicate

over Ethernet using Modbus-TCP.

Note: This unit is designed to work on a battery so +12VDC is operating

voltage, not +24VDC.

The CTI 2500-RIO-A RS485 Remote Base Controller is a member of Control

Technology's family of I/O modules compatible with programmable controllers

from Siemens® and CTI.

The 2500-RIO-A RS485 Remote Base Controller (RBC) allows a 2500 Series™

I/O base to function as a remote base. The 2500-RIO-A is intended to be a

replacement for the Siemens® 505-6851-A RBC.

The 2500-RIO-A resides in 2500 Series™ base. It installs in the second slot

from the left, adjacent to the power supply module. When used in a

2500-R11-A Redundant Base, two 2500-RIO-A units can be installed

in the third and fourth slots from the left, adjacent to the second power

supply.

Do not install this module into a normal I/O slot, as damage can occur.

The 2500 Series® Compact Controllers bringexciting new features and a new

level of process performance to CTI’s 2500 Series® Control Systems.

The Compact Controller easily handles small to large discrete and process

applications.  Compact processors have the same features and performance

as our Classic processors, and include PID loops, alarms and special

mathematical functions to make them perfect for process applications.

The controllers are supported by a complete range of digital, analog, and

specialized I/O modules, power supplies, and I/O bases, all available from

CTI.

The 2500-PADP is a Power Supply Adapter that enables the use of CTI 2500

Series® power supplies within legacy Texas Instruments Series 500 I/O bases.

This adapter offers a seamless upgrade path, allowing you to modernize your

Series 500 system without a complete system replacement.

You can immediately replace failed Series 500 power supplies with reliable

and compatible CTI 2500 Series® replacements. Subsequently, when budget

and/or time permits, you can then transition to a full CTI 2500 Series® system

without losing your initial investment in the replaced power supplies.

The 2500C-8-AO is designed for CTI’s 2500 Series® Compact I/O System.

The module provides 8 outputs that can be configured for voltage or current

signals on a channel by channel basis.

SST Woodhead SST-ESR2-CLX-RLL Ethernet Modbus/Serial Modbus Communication

Woodhead PB3-PCIe 2 SST-PB3-PCIE 1 V1.1.0 Communication card

MOLEX SST-DN4-PCIE-H / SSTDN4PCIEH 

SST 5136-PFB-PCI Profibus Communications Adapter Module

CTI 901B-2500-RBC Profibus Remote Base Controller

CTI 901B-2500-RBC Profibus Remote Base Controller

CTI Control Techniques 901D-2500-RBC Profibus Remote Base Controller

CTI 2500-RIO-B RS485 Remote Base Controller

CTI 2500C-RBC-RS485 RS485 Remote Base Controller

CTI Control Technology 901E-2589-A Input Module PCB 

WOODHEAD SST DHP-PCI V1.2.0 SD-PCI-U DATA HIGHWAY PLUS INTERFACE CARD

Molex SST-PB3-VME-2 Brad Communication Board SSTPB3VME2E

AMAT 0190-34511 REV. 08 SST woodhead DNet bus scanner DNPCPCI3U1-NC- 3V V1.3.4

WOODHEAD SST-DN3-PCU-1 DEVICENET INTERFACE CARD

SST / WOODHEAD 5136-PFB-VME PROFIBUS INTERFACE CARD 5136PFBVME NIB