ABB GJR5251000R0303 07KP90 RCOM Communications Module

07 KP 90 RCOM Communications Module

Manufacturers

ABB

Model(s)

ABB Advant Controller 31. ABB Advant OCS

Additional Information

07KP90 communications module for Series 90. order number GJR 525 1000 R0303

Estimated Shipping Size

Dimensions: 6.0" x 4.0" x 6.0"   (15.2 cm x 10.2 cm x 15.2 cm)

Weight: 0 lbs 12.9 oz (0.4kg )

Tariff Code: 8517620050 Country of Origin: Sweden

Ships from Webster NY, USA 07KP90

They are linked to the central control system (SCADA/DMS) that manages the utility network and are the heart of the secondary substation automation system.

Key features

- Highly reliable control and monitoring of up to three switchgears per ARC600

- Status information for three switchgear devices and three earthing disconnectors

- Disconnect switch position and grounding status via front LEDs

- Local and remote use of the disconnectors

- Actuator motor overload protection

- Measurement of load current in the motor circuit

- Motor overload protection based on current limiting (software fuse)

- Isolation switch open and close time measurement

- Supports Fault Passage Indication (FPI) for improved fault management

- Supports external MV directional fault indication and multi-function LV power quality metering

- Integrated Wireless Communications

- Always-on two-way communication based on cellular networks (GPRS, 3G, LTE)

- Communication monitoring and automatic reconnection

- High data security through internal VPN and firewalls

- Supports Arctic Patrol centralised device management application

- Protocol converters

- Reliably connects legacy IEC-101 and Modbus serial devices to modern IEC-104 and Modbus TCP TCP TCP TCP/IP based control systems

- Built-in battery charger with advanced battery control features

- Temperature compensated charging

- Battery monitoring/testing (condition monitoring)

- Deep discharge protection

- IEC-101 SCADA compliant

- IEC 60870-5-101 slave (including dial-up) to support existing system installations

- Supports the possibility of future SCADA migration from IEC-101 to IEC-104. as the mode of operation is selected via parameterisation

- IEC-101 mode of operation as an unbalanced slave device

- Heater control to limit the effects of ambient temperature changes (e.g. condensation)

- Rugged aluminium housing design for easy DIN rail mounting