ABB LS4000 Tunable diode laser analyzer Certifications

Certifications

CE conformity

The LS4000 and LS4060 gas analyzers satisfy the require

ments of the European directives 2006/95/EC Low voltage

directive, 2004/108/EC EMC directive and 94/9/EC ATEX

directive.

Compliance with the requirements of directive 2006/95/EC is

evidenced by full compliance with European standard

EN 61010-1:2010.

Compliance with the requirements of directive 2004/108/EC

is evidenced by full compliance with European standards

EN 61326-1:2006. EN 61000-3-2:2006 + A1:2009 +A2:2009.

EN 61000-3-3: 2008.

Compliance of the explosion protected versions type LS4060

with the requirements of directive 94/9/EC is evidenced by full

compliance with the European standards listed in the

“Explosion protection to European standards – ATEX” section.

Electrical safety to IECEE CB scheme

The LS4000 and LS4060 gas analyzers are certified to the

„IEC system for mutual recognition of test certificates for

electrical equipment“, evidenced by full compliance with

standard IEC 61010-1 (Ed. 3).

CB Test Certificate No. DE1-52306

Electrical safety to U.S. and Canadian standards – UL, CSA

The LS4000 and LS4060 gas analyzers are certified for use in

general purpose environment, evidenced by full compliance

with standards CAN/CSA-C22.2 No. 61010-1-12 and UL Std.

No. 61010-1 (3rd Edition).

Certificate No. 70001037

Explosion protection to European standards – ATEX

The LS4060 gas analyzer (transmitter and receiver unit) in the

version for use in zone 1 satisfies the European standards

EN 60079-0:2011. EN 60079-1:2007. EN 60079-28:2007.

EN 60079-31:2009.

Designation:

II 2(1)G Ex d [op is Ga] IIC T6 Gb

II 2D Ex tb IIIC T88°C Db

EC-Type examination certificate No. BVS 13 ATEX E 008 X

The LS4060 gas analyzer (transmitter and receiver unit) in the

version for use in zone 2 satisfies the European standards

EN 60079-0:2011. EN 60079-1:2007. EN 60079-28:2007.

EN 60079-31:2009.

Designation:

II 3(1)G Ex d [op is Ga] IIC T6 Gc

II 3D Ex tc IIIC T88°C Dc

Certification by manufacturer’s declaration

Explosion protection to international standards – IECEx

The LS4060 gas analyzer (transmitter and receiver unit)

satisfies the European standards EN 60079-0:2011.

EN 60079-1:2007. EN 60079-28:2006. EN 60079-31:2008.

Designation:

Ex d [op is] IIC T4 Gb

Ex tb IIIC T88°C Db

Certificate No. IECEx BVS 13.0013X

Explosion protection to U.S. and Canadian standards –UL, CSA

The LS4060 gas analyzer (transmitter and receiver unit) is

certified for use in explosion hazard areas Class I, Div. 1.

Groups B, C, D; Class I, Div. 2. Groups A, B, C, D; T4A;

Class I, Zone 1. AEx d, IIB+H2 T4

Certificate No. 12.2589676X

Remark

Information regarding the explosion protection of the junction

boxes can be found in the documentation of the junction box manufacturer.