Upgrading from the Original FloBoss S600 to the New
FloBoss S600+
1. We have a large installed base of FloBoss S600s, but we want to
upgrade to the FloBoss S600+. Can we do this without replacing
the complete machine?
Yes. The upgrade process is relatively straightforward. First, save the existing FloBoss
S600 confi guration. Then disconnect and remove the original CPU module from the
case. Next, you insert the enhanced CPU module, and then download the original
confi guration fi le to the FloBoss S600+.
The new FloBoss S600+ now operates in the exact same way as the previous FloBoss
S600s, and the new features of the FloBoss S600+ are also available.
For further details on the FloBoss S600+ upgrade procedure consult the “FloBoss
S600+ Field Upgrade Guide” available on the Remote Automation Solutions web site
at: http://www2.emersonprocess.com/en-US/brands/FloBoss/gasfl owcomputers/
s600/Pages/S600.aspx
2. We are planning to upgrade our FloBoss S600s to the FloBoss
S600+, we plan on buying the required upgrade kits but will we
need a new version of Config600?
To upgrade from a FloBoss S600 to the FloBoss S600+, if none of the new features/
functionality is required, then you can still use the original version of Confi g 600 (this
must be version 1.4d or later).
While this can be carried out with Confi g600 version IPL600. the upload download
tool, it is recommended that this is carried out with a Confi g600 lite license or higher
(Confi g600 Lite+ or Confi g600 Pro).
If any the new features of the FloBoss S600+ are required, then the confi guration
must be updated with Confi g600 Pro version 3.xx or later and downloaded into the
upgraded S600+ fl ow computer.
As with all fi rmware or hardware changes it is recommended that the upgraded
FloBoss S600+ fl ow computer is tested before being put into service.
3. I have a Pro level license for Config600 v2.7. but I now want to use
the new features provided by the FloBoss S600+. How do I get a new
version of Config600 that will allow me to use the new features?
Please download the latest version from Supportnet® and then then apply for a new
license using the online instructions from the tool. If you already have a valid license
for a particular version (such as Confi g lite), you will be able to get a similar license for
the latest version.
If you do not have a valid license yet, you will need to contact your local sales
representative.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved