FloBoss S600 Interfaces
1. Does the Operator Interface via the front
display panel change on the FloBoss S600+?
Is the change transparent, or is training
required?
With the exception of a cosmetic change, the front display
panel and operator interface work as before. No re-training is
required.
2. Will the Ethernet ports on the FloBoss S600+
remain as a Modbus over Ethernet interface as
per the current FloBoss S600 machine?
The fi rst Ethernet port on the FloBoss S600+ generally
remains unchanged. A second Ethernet port (previously
available only on an option module) is now standard on
the FloBoss S600+. The supported protocols will remain
Modbus/TCP and Modbus over Ethernet. Previously, both
ports were limited to 10MB/s and half duplex. Now, both
ports have the option of running at 100MB/s in full duplex
mode.
3. The current FloBoss S600 version stores the
required information points in a Modbus
register map. Does this methodology
change on the FloBoss S600+, and are all
information points still available via Modbus
communications?
The Modbus register map remains the same.
4. If the Modbus structure remains, does the
previously-developed Modbus polling for the
existing FloBoss S600 remain the same, or do
we need to define a new software interface for
the FloBoss S600+?
The existing interface remains compatible with the FloBoss
S600+. The available baud rates have increased from
between 300 and 38.400 on the existing FloBoss S600 to
between 2.400 and 57.600 on the new FloBoss S600+.
5. Does the web interface to the existing FloBoss
S600 change on the FloBoss S600+?
The web server interface on the FloBoss S600+ is compatible
with the existing FloBoss S600. We have enhanced the
interface to improve security and provide additional
diagnostic capabilities.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved