Emerson PMCspan PMC Expansion Mezzanine Specifications

Specifications

ForM FaCTor

Single-slot 6U VMEbus format

PCI-To-PCI InTErFaCE

Controller:  PLX6150 PCI-to-PCI interface bridge

Address/Data:  A32/D32

PCI Bus Clock:  33 MHz

Signaling:  5V

Mating Connector on Host Board:  114-pin PCI

Expansion Connector; still allows use of host CPU’s

original PMCs

Compliance:  PCI Local Bus Specification, Revision 2.1

IEEE P1386.1 PCI MEzzanInE CarD SloTS

Address/Data:  A32/D32. PMC PN1. PN2. PN4

connectors

PCI Bus Clock:  33 MHz

Signaling:  5V

Power:  +3.3V, +5V, ±12V, 7.5 watts max. per PMC

Module Types:  Two single-wide or one double-

wide, front- panel or P2 I/O

P2 PMC I/O:  64 I/O signals from first PMC routed

to VMEbus P2 connector

PowEr rEquIrEMEnTS (no PMCS InSTallED)

Power:    +5V @ 0.44 ampere (max.)

+12V @ 0 ampere (max.)

–12V @ 0 ampere (max.)

BoarD SIzE

Height:  233.4 mm (9.2 in.)

Depth:  160.0 mm (6.3 in.)

Front Panel Height:  261.8 mm (10.3 in.)

Width:  19.8 mm (0.8 in.)

ElECTroMagnETIC CoMPaTIBIlITy (EMC)

Intended for use in systems meeting the following

regulations:

U.S.: FCC Part 15. Subpart B, Class B c

Canada: ICES-003. Class B c

This product was tested in a representative system to

the following standards:

CE Mark per European EMC Directive 89/336/EEC  c

with Amendments; Emissions: EN55022 Class B;

Immunity: EN55024

SaFETy

All printed wiring boards (PWBs) are manufactured with

a flammability rating of 94V-0 by UL recognized manufacturers.