The RAO02 Redundant Analog Output module processes up to 16 high-level,
group isolated, analog output field signals.
Each channel is independently configurable for either 4 to 20 mA or 1 to +5 VDC ranges.
FC 221 (I/O Device Definition) sets AO module operating parameters and
each output channel is configured using FC 223 (Analog Output CH) to
set indivdual output channel parameters such as engineering units,
High/Low Alarm limits, default value in event of loss of communication with controller, etc.
D/A resolution of each channel is 12 bits.
The RAO02 module has one D/A converter for each output channel.
In current mode, the RAO02 module supports HART v5.4 instruments and
provides short circuit protection by limiting current to a maximum of 26 mA.
The RAO02 module will also detect an open circuit in less than 5 seconds.
Features and benefits
• 16 independently configurable channels supporting:
• 4 to 20 mADC or 1 to +5 VDC
• Up to 24 HART v5.4 secondary variables Total
• Max 4 sec vars per analog input CH
• Sec HART variables available to control logic
• 12 to 16-Bit (with polarity) A/D resolutionV
• A/D update of all 16 Channels in 100 msecs
• Accuracy is ±0.1 % of Full Scale Range where FSR = 25 mA or 6.25 VDC
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved