Woodward easYgen-800 Technical Manual Genset Control

Fig. easYgen-800

1: Terminals 1 to 22: Power supply, relays, discrete inputs, MPU, D+, ...

2:  Terminals 23 to 26: CAN (J1939)

3:  Terminals 33 to 35: RS-485 interface

4: USB service port for PC/laptop with ToolKit-SC

5:  Terminals 62 to 64: RS-232 interface

6:  ETHERNET interface connector (RJ-45)

7:  Terminals 56 to 61: Analog inputs

8:  Terminals 49 to 55 (screwable): Generator and Ground current, discrete input 8

9:  Terminals 45 to 48: Generator voltage

10:  Terminals 41 to 44: Intentionally not implemented

11: Terminals 36 to 40: Relay outputs

12:  SD micro card slot

The easYgen-800 is a control units for engine-generator system management

applications.

The control unit can be used in applications such as: co-generation, stand-by or

distributed generation.

Scope of delivery

The following parts are included in the covering box. Please check prior to the installation

that all parts are present:

• Device easYgen genset control

All screwable terminal connectors are delivered with plug and jack

• Clamp fastener installation material (4x)