Woodward easYgen-600 Genset Start/Stop Control Specifications

SPECIFICATIONS

Power Supply

Operating Voltage

(Reverse polarity protected)

8.0 VDC to 35.0 VDC, Continuous Power

Supply.

Maximum supply voltage Short Time 80 V (5-10 s); Long T. 50 V

Minimum supply voltage 6.5 V

Maximum operating current (All relays closed, LCD bright)

380 mA (12 V); 188 mA (24 V)

Maximum standby current (All relays closed, LCD dimm)

90 mA (12 V); 42 mA (24 V)

Power Consumption <4 W (standby ≤ 2 W)

Battery voltage measurement  Accuracy: 1% (12V/24V)

Alternator Input Range

3-Phase 4-Wire

3-Phase 3-Wire

Single-Phase 2-Wire

2-Phase 3-Wire

50 Hz/60 Hz

AC15V - AC360V (ph-N)

AC30V - AC620V (ph-ph)

AC15V - AC360V (ph-N)

AC15V - AC360V (ph-N)

AC-Measurement

Voltage Accuracy

(400/480 V % rated)

Phase-phase: 100 .. 624 V：1%;

50 .. 100 V：1.5 %

Phase-neutral: 100 .. 360 V：1%

50 .. 100 V：1.5 %

Minimum frequency Generator: 10 Hz; Mains: 27 Hz

Maximum frequency Generator: 99.5 Hz; Mains: 99.5 Hz

Frequency resolution 0.1 Hz (10 .. 99 Hz)

Frequency accuracy ±0.1 Hz

Nominal CT secondary rating 5 A

Overload Measurement Max.: 10 A

Current Accuracy 1 %

Housing

Case Dimension easYgen-600: 209 X 166 x 45 mm3

easYgen-800: 237 x 172 x 45 mm3

Panel Cutout easYgen-600: 186 x 141 mm2

easYgen-800: 214 x 160 mm2

Working Conditions Temperature: (-25 to +70) °C;

Humidity: (20 to 93) %RH

Storage Condition Temperature: (-25 to +70) °C

Protection Level IP65 in the front, mounted with kit

IP20 on rear side

Insulating Intensity:

Apply 2.2 kVAC voltage between high voltage terminal and low voltage

terminal. The leakage current is not more than 3 mA within 1 min.

Net Weight 0.85 kg

Speed Sensor Voltage 1.0 V to 24.0 V (RMS)

Frequency 10.000 Hz (max.)

Excitation current D+ 110 mA (12 V); 230 mA (24 V)

Start Relay Output 16 A DC28V supply output

Fuel Relay Output 16 A DC28V supply output

Auxiliary Relay Output (1 .. 3) 7 A DC28V supply output

Auxiliary Relay Output (4 .. 6) 7 A AC250V voltage free output

Discrete Inputs

Low level threshold Approx. 1.3 V

Maximum input voltage 60 V

Minimum input voltage 0 V

High level threshold 1.7 V