DeltaV Network Device Command Center
The DeltaV Network Device Command Center is a DeltaV
application that provides full integration of the DeltaV Smart
Switches into the DeltaV and the DeltaV 2.5 networks. The
Command Center is used to perform switch commissioning
to create the communication between the DeltaV network
and the switch management application. The Network
Device Command Center provides access to the switch and
network diagnostics, device alert details, and port lockdown
applications. The management application provides a
centralized application to commission, diagnose, troubleshoot,
and secure the DeltaV Smart Switches. The Command Center
can be viewed by any DeltaV user.
The ability to commission and lock switches is limited to
the Can Configure, Can Calibrate, and Can Download user
privileges. Starting in DeltaV v13.3 the DeltaV Smart Switch can
be installed in the DeltaV 2.5 network or other DeltaV networks
external to the DeltaV control network. For the DeltaV Smart
Switch to be installed in a network the switch must be connected
to a DeltaV workstation (for example, Professional Plus) running
control modules.
DeltaV Plug-and-Play Installation
The DeltaV switches are easy to install in your DeltaV
network. Since they come preconfigured from the factory,
installation is as simple as mounting the unit, connecting the
communications cables, and powering up the unit. The switch
is configured to begin communications on power up — no
additional setup is required for the switching function to work
properly. This immediately returns the system to full redundancy
capability as quickly as possible with no time wasted configuring
the switch prior to installation.
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved