ABB Cyberex® Cyberwave DC Charger Standard features

Standard features

–   5-year product warranty

–   Universal main control board operates in any of our DC Charger digital chargers

–   1% digital LED meter for VDC, Adc, timer hours and alarm settings

–   AC on indicating light

–   AC input and DC output circuit breakers

–   Float/equalize selector switch with indicating light

–   Manual equalize timer (0–255 hr.) with indicating light

–   AC line failure automatic equalize timer (0–255 hr.) with indicating light

– Self-diagnostics

–   Local or remote voltage sense with redundancy to protect against remote sense failure

–   High DC voltage shutdown (HVSD)

–   Reverse polarity protection via free wheeling diodes

–   Front panel controls can be disabled for security

–   Input and output MOV surge suppressors

–   CU-AL I/O compression lugs

–   Switchboard wire, UL VW-1

–   Membrane front panel

–   Enclosure pre-treated using a 5-stage iron phosphate process

with baked epoxy powder coating in ANSI 61 gray

–   Alarm assembly with local LEDs and summary relay contact

for AC failure, DC failure, high VDC, low VDC, positive and negative ground fault

–   A redundant analog circuit for LVDC alarm, independent of the microprocessor

–   6 pulse rectification

–   Forced load share during parallel operation

–   Redundant control loops for higher reliability

–   Custom parts data package and production test data reports shipped with each unit

–   User-friendly operating manual with standard drawings

–   Quick setup sheet

Options and accessories

–  DC output filter per NEMA PE5-1996. standard and battery eliminator

–  AC Input/DC output fuses

–  Medium or high AIC circuit breakers

–  AC Input lightning arrestor

–  Fungus proofing (tropicalization)

–  Static proofing

–  NEMA type 2 drip shield

–  Battery temperature compensation

–  Rack mounting (style-5018 only)

–  Mechanical lock for front door

–  Cabinet heater assembly

–  NEMA 4/12 type enclosure with fan

–  Auxiliary alarm relay board

–  Copper ground bus

–  Wall mounting (style-5018 only)

–  Communications module for DNP3 level 2 or modbus protocols

–  Forced load share cable

–  Analog AC ammeter

–  Analog AC voltmeter

–  Zero-center ground detection meter

–  Custom paint

–  Barrier type alarm terminal block

–  Fan control contactor

–  End of discharge alarm

–  Battery discharge alarm

–  Custom drawing package with optional CAD and PDF files

–  ABS certification upon request

–  CE marking upon requ