Johnson Controls Simplex S4100-0037 4100ES Enclosures

Remote Annunciators

Remote annunciators include a bay assembly, a power distribution

interface module (PDI), a Transponder Interface Module, and an

interconnect harness. Communications with the host fire alarm

control panel are through a Remote Unit Interface (RUI or RUI+)

connection that allows for up to 2500 ft (762 m) distance. RUI can

communicate with up to a total of 31 remote devices for each master

controller (on one or multiple RUI channels) and can be wired as a

Class B or Class X communication pathway. Wiring can be either

shielded or unshielded, twisted, or untwisted single pair wiring.

Optional Expansion Bays

Each includes a PDI and accept a variety of optional modules for

specific annunciator functions.

The Battery Compartment

The battery compartment (bottom) accepts two batteries, up to 50 Ah.

Battery mounting does not interfere with available module space.

Packaging Availability

• Modules are power-limited (except as noted, such as relay modules)

• Enclosure are available for one, two, or three bay sizes or for cabinet

rack mounting

• Boxes, doors with tempered glass inserts, and dress panels are available

in beige or red (ordered separately)

• Refer to document  S4100-0037  for enclosure details.

Remote Command Center

The optional Remote Command Center occupies the top bay of a Remote

Annunciator. It provides an LCD status readout with keyswitch activated

control switches and a local tone-alert sounder. Features are essentially

identical to the Remote LCD Annunciator model 4603-9101 (reference

document S4603-0001).

Remote Master Firefighter Phone

When equipped with a remote master phone, the authorized user can

connect to remote phone call-in requests and callers can be connected

to each other. Although intended for use in assisting fire responders,

these system are also helpful during system setup and test.

Communications protocols

The CGM and CVM controllers can communicate using

BACnet MS/TP, N2. or wireless Zigbee. The controllers

auto-detect the protocol that is connected, which enables

the same controller to support multiple communication

protocols without the need to purchase a special model

per protocol, and without extra manual setup.

The XPM expansion modules can communicate using

BACnet MS/TP, or wireless Zigbee® using a ZFR/ZFR Pro

Wireless Field Bus Router (on the FC Bus only). By default,

the XPM expansion modules communicate using the

BACnet MS/TP protocol.

ALSTOM POWER MP-10246 FEED ROLL SLEEVE

Amtrak Alstom Bombardier High Speed Train Illustrated Parts Manuals 7501 7502

Frequency Selectable Shunt FSS-1C/2C

ALSTOM hat blue adjustable cotton cap

Alstom Wire Fault Detection Module C1003100 WFD127 Alspa

Alstom MVAX11J1DA0751A Auxiliary Relay Supervises Trip Circuit Breaker 

ALSTOM CONTROLLER UNIT(SIR4)

ALSTOM 029.069650 Control Set -15V, 1A

Alstom 70BH01-DB Rev. A Circuit Board.

Alstom ESH-700-VL-FO Limelight Exacta Flame Scanner Sensor 22v-dc

Alstom MVAX11J1DA0751A Auxiliary Tripping Relay Supervises Trip Circuit Breaker