Power Engineering 
K-JIANG
Product
Article
NameDescriptionContent
English 简体中文
  • DEIF iE 350 PLC Robust right out of the box
  • DEIF iE 250 PLC Versatile and modular intelligent energy PLC controller
  • DEIF XL / BW / BRW-2 Illuminated indicators
  • DEIF SGC 120/121 Single Genset Controllers
  • DEIF Load Sharing Unit LSU-112DG
  • DEIF USW-3 DEIF utility software
  • DEIF CIO 116 CAN bus-based I/O module
  • DEIF CIO 208 CAN bus-based I/O module
  • DEIF CIO 308 CAN bus-based I/O module
  • DEIF AGC 150 Mains Advanced Genset Controller
  • DEIF SGC 421 Mk II Single genset controller
  • DEIF SGC 421 Single genset controller
  • DEIF SGC 420 Mk II Lite Single genset controller
  • DEIF SGC 420 Mk II Single genset controller
  • DEIF SGC 420 Single genset controller
  • DEIF SGC 410 Mk II Single genset controller
  • DEIF SGC 410 Single genset controller
  • DEIF SGC 121 Single genset controller
  • DEIF SGC 120 Mk II Single genset controller
  • DEIF AGC 150 Generator Marine Standalone generator controller for marine applications
  • DEIF AGC 150 Engine Drive
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA HIMax®Analog Output Module X-AO 16 01
  • HIMA HIMax® Digital Output Module X-DO 24 01
  • HIMA HIMax®Digital Output Module X-DO 32 01
  • HIMA HIMax® Analog Input Module X-AI 16 51
  • HIMA HIMatrix Safety-Related Controller DI 32 01
  • HIMA HIMax® Analog input module X-AI 32 01
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01
  • HIMA HIMax®Digital Output Module X-DO 32 51
  • HIMA HIMax®Counter Module X-C1 24 51
  • HIMA HIMax®Digital Input Module X-DI 16 01
  • HIMA X-DI 32 52 Digital Input Module for ProximitySwitches and Wired Contact Makers
  • HIMA HIMax® Analog input module X-AI 32 01
  • Beckhoff EL1918 | EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE, TwinSAFE Logic
  • Beckhoff EL1904 | EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE
  • Beckhoff EL1899 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, ground switching, push-in
  • Beckhoff EL1889 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff EL1852 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff ED1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, push-in
  • HIMA PT 201 | SILworX® Engineer
  • HIMA X-SB 01 HIMax® System Bus Module
  • KEBA Kemro X- Industrial Automation Platform open, modular, easy-to-use
  • Kollmorgen GOLDLINE servomotors
  • Kollmorgen GOLDLINE Motors with SERVOSTAR
  • Kollmorgen PMX Stepper Motors
  • Kollmorgen EKM Series Brushless AC Servo Motors
  • Kollmorgen Goldline® S Series Submersible Servo Motors
  • Kollmorgen Goldline EB and EBH Series
  • Kollmorgen Goldline B/M & BH/MH Series
  • GE Multilin™ 889 Generator Protection System
  • GE Multilin 859 Comprehensive and Compact Motor Protection
  • GE Multilin 869 Overview
  • GE Multilin 869 Comprehensive Motor Protection and Management
  • GE GridBeats™ APS Key Benefits and Applications
  • GE MULTILIN 850 Feeder and Bay Controller Solutions for Industrial and Utility Applications
  • GE The GridBeats™ APS is a family of hardware and software products
  • GE Multilin 8 Series Platform Overview
  • GE Multilin™ 845 Transformer Protection System
  • GE GridBeats™ APS Automation and Protection System
  • GE PQMII Power Quality Meter™
  • BAUMULLER b maXX softdrivePLC - Intelligence in the drive
  • BAUMULLER b maXX 6300 – Single / double-axis modules for maximum scalability
  • BAUMULLER b maXX 3300 - Servo-controller up to 5 kW
  • EATON Effortless control easyE4 nano PLC
  • Woodward LS-5 Series V2 Multi-Breaker Control for complex power management applications
  • EATON XN300 Slice card modular I/O system
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-NRI/EN Network Resource Interface
  • Honeywell x-smart System Management Software
  • Honeywell x-map4p Integrated Audio Player
  • Honeywell X-DA1500 High-efficiency Power Amplifier
  • Honeywell X-DA4125 HIGH EFFICIENCY POWER AMPLIFIER
  • Honeywell X-DA2250 High Efficiency Power Amplifier
  • Honeywell X-DA2250EN-B High Efficiency Power Amplifier
  • Honeywell X-DA1500EN High Efficiency Power Amplifier
  • Honeywell X-DA4125EN High Efficiency Power Amplifier with 24 VDC Backup Power Supply
  • Honeywell X-ND100 Digital Noise Detector
  • Honeywell X-K8 Extension Keypad
  • Honeywell X-K4 Extension Keypad
  • Honeywell X-NPMS Configurable Network Paging Station
  • Honeywell X-DCS3000 Digital Integrated System Manager
  • Honeywell X-DCS2000 Digital Integrated System Manager
  • Automotion LC-4 DC Brushless Motor Control
  • Honeywell X-DCS2000/EN Digital Integrated System Manager 50/60Hz 100-240V #4
  • Kongsberg M3 Sonar® HF with sound velocity sensor
  • Kongsberg M3 Sonar® HF
  • Kongsberg M3 SONAR® - 4000 M WITH SYNCHRONIZATION AND 1PPS
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1808 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, 2-wire connection
  • Euresys Coaxlink Octo PCIe 3.0 eight-connection CoaXPress frame grabber
  • Euresys Coaxlink Mono CXP-12 LH
  • Euresys Coaxlink Duo CXP-12
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output, 24 V DC, 1 µs, 0.5 A, multi-timestamp
Home ⊙ Product ⊙ ABB MB510 3BSE002540R1 Program Card Interface
Current Location:

E-mail

Password
Register Forgot password?
ABB MB510 3BSE002540R1 Program Card Interface
❤ Add to collection

ABB MB510 3BSE002540R1 Program Card Interface

+86-18144100983
kongjiangauto@163.com
wind, petroleum, chemical, natural gas, Marine, mining, aviation, electronics, steel, nuclear power, electric power, coking, air separation and so on
PLC, DCS, servo, analog, Ethernet, digital, redundant module, tension system, excitation, generator management, human-machine interface, detection card, sensor, AC drive, etc
U.S.＄8700.00
U.S.＄4446.00
Weight：3.600KG
Quantity：
(Inventory: 6)
Buy now
Add to cart
Product parameters
  • Tell:+86-18144100983
  • email:kongjiangauto@163.com
  • Application:wind/ petroleum/ chemical/ natural gas/ Marine/ mining/ aviation/ electronics/ steel/ nuclear power/ electric power/ coking/ air separation and so on
  • Series:PLC/ DCS/ servo/ analog/ Ethernet/ digital/ redundant module/ tension system/ excitation/ generator management/ human-machine interface/ detection card/ sensor/ AC drive/ etc
Feature

The start-up procedure includes actions which need to be performed only when the

drive is powered up for the first time (eg, entering the motor data). After the first start

up, the drive can be powered up without using these start-up functions. The start-up

procedure can be repeated later if start-up data needs to be changed.

In addition to the PC tool commissioning and drive power-up, the start-up procedure

includes the following steps:

• entering the motor data and performing the motor identification run

• setting up the encoder/resolver communication

• checking the emergency stop and Safe Torque Off circuits

• setting up the voltage control

• setting the drive limits

• setting up the motor overtemperature protection

• tuning the speed controller

• setting up the fieldbus control.

800xA for Symphony Plus Harmony communicates with the control systems  through a Cnet-to-computer interface (IET800. PNI800).

800xA for Symphony Plus Harmony is a distributed process management and  control system.

Using a series of integrated Harmony control units, the system  allows monitoring and control of process variables such as flow rate,

temperature,  and pressure according to a control configuration that the engineer or technician  defines.

A Harmony control unit is a controller and its I/O devices connected for  communication on control network (Cnet).

800xA for Symphony Plus Harmony operates in a Windows environment on  personal computer hardware.

Using interactive process graphics, the operator can  monitor and control all Analog loops and Digital devices interfaced to the network  through Harmony control units.

800xA for Symphony Plus Harmony provides maintenance personnel with the  capability to globally monitor

the operating status of any system component on the  network, and to diagnose component failures from any workstation.

800xA for Symphony Plus Harmony also provides the Harmony Executive Service.

It is an 800xA service that controls underlying 800xA for Symphony Plus Harmony  services.

ABBCI855ABBCI854AK01ABBTU812V1
ABBCI857ABBSCYC51010ABBTU814V1
ABBCI858ABBCI854AK01ABBTU830V1
ABBSD821ABBAX670ABBTU831V1
ABBSD822ABBYT204001-FY/1ABBTU835V1
ABBSD823ABBPM865K01ABBTU836V1
ABBSS822ABBIEMMU21ABBTU837V1
ABBCI801ABB1TGE120021R0010ABBTY801K01
ABBCI840ABBPP826AABBTY804K01
  • DEIF USW-3 DEIF utility software
  • DEIF CIO 116 CAN bus-based I/O module
  • DEIF CIO 208 CAN bus-based I/O module
  • DEIF CIO 308 CAN bus-based I/O module
  • DEIF AGC 150 Mains Advanced Genset Controller
  • DEIF SGC 421 Mk II Single genset controller
  • DEIF SGC 421 Single genset controller
  • DEIF SGC 420 Mk II Lite Single genset controller
  • DEIF SGC 420 Mk II Single genset controller
  • DEIF SGC 420 Single genset controller
  • DEIF SGC 410 Mk II Single genset controller
  • DEIF SGC 410 Single genset controller
  • DEIF SGC 121 Single genset controller
  • DEIF SGC 120 Mk II Single genset controller
  • DEIF AGC 150 Generator Marine Standalone generator controller for marine applications
  • DEIF AGC 150 Engine Drive
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA HIMax®Analog Output Module X-AO 16 01
  • HIMA HIMax® Digital Output Module X-DO 24 01
  • HIMA HIMax®Digital Output Module X-DO 32 01
  • HIMA HIMax® Analog Input Module X-AI 16 51
  • HIMA HIMatrix Safety-Related Controller DI 32 01
  • HIMA HIMax® Analog input module X-AI 32 01
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01
  • HIMA HIMax®Digital Output Module X-DO 32 51
  • HIMA HIMax®Counter Module X-C1 24 51
  • HIMA HIMax®Digital Input Module X-DI 16 01
  • HIMA X-DI 32 52 Digital Input Module for ProximitySwitches and Wired Contact Makers
  • HIMA HIMax® Analog input module X-AI 32 01
  • Beckhoff EL1918 | EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE, TwinSAFE Logic
  • Beckhoff EL1904 | EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE
  • Beckhoff EL1899 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, ground switching, push-in
  • Beckhoff EL1889 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff EL1852 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff ED1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, push-in
  • HIMA PT 201 | SILworX® Engineer
  • HIMA X-SB 01 HIMax® System Bus Module
  • KEBA Kemro X- Industrial Automation Platform open, modular, easy-to-use
  • Kollmorgen GOLDLINE servomotors
  • Kollmorgen GOLDLINE Motors with SERVOSTAR
  • Kollmorgen PMX Stepper Motors
  • Kollmorgen EKM Series Brushless AC Servo Motors
  • Kollmorgen Goldline® S Series Submersible Servo Motors
  • Kollmorgen Goldline EB and EBH Series
  • Kollmorgen Goldline B/M & BH/MH Series
  • GE Multilin™ 889 Generator Protection System
  • GE Multilin 859 Comprehensive and Compact Motor Protection
  • GE Multilin 869 Overview
  • GE Multilin 869 Comprehensive Motor Protection and Management
  • GE MULTILIN 850 Feeder and Bay Controller Solutions for Industrial and Utility Applications
  • GE Multilin 8 Series Platform Overview
  • GE Multilin™ 845 Transformer Protection System
  • GE The GridBeats™ APS is a family of hardware and software products
  • GE GridBeats™ APS Key Benefits and Applications
  • GE GridBeats™ APS Automation and Protection System
  • GE PQMII Power Quality Meter™
  • BAUMULLER b maXX softdrivePLC - Intelligence in the drive
  • BAUMULLER b maXX 6300 – Single / double-axis modules for maximum scalability
  • BAUMULLER b maXX 3300 - Servo-controller up to 5 kW
  • EATON Effortless control easyE4 nano PLC
  • Woodward LS-5 Series V2 Multi-Breaker Control for complex power management applications
  • EATON XN300 Slice card modular I/O system
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-NRI/EN Network Resource Interface
  • Honeywell x-smart System Management Software
  • Honeywell x-map4p Integrated Audio Player
  • Honeywell X-DA1500 High-efficiency Power Amplifier
  • Honeywell X-DA4125 HIGH EFFICIENCY POWER AMPLIFIER
  • Honeywell X-DA2250 High Efficiency Power Amplifier
  • Honeywell X-DA2250EN-B High Efficiency Power Amplifier
  • Honeywell X-DA1500EN High Efficiency Power Amplifier
  • Honeywell X-DA4125EN High Efficiency Power Amplifier with 24 VDC Backup Power Supply
  • Honeywell X-ND100 Digital Noise Detector
  • Honeywell X-K8 Extension Keypad
  • Honeywell X-K4 Extension Keypad
  • Honeywell X-NPMS Configurable Network Paging Station
  • Honeywell X-DCS3000 Digital Integrated System Manager
  • Honeywell X-DCS2000 Digital Integrated System Manager
  • Automotion LC-4 DC Brushless Motor Control
  • Honeywell X-DCS2000/EN Digital Integrated System Manager 50/60Hz 100-240V #4
  • Kongsberg M3 Sonar® HF with sound velocity sensor
  • Kongsberg M3 Sonar® HF
  • Kongsberg M3 SONAR® - 4000 M WITH SYNCHRONIZATION AND 1PPS
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1808 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, 2-wire connection
  • Euresys Coaxlink Octo PCIe 3.0 eight-connection CoaXPress frame grabber
  • Euresys Coaxlink Mono CXP-12 LH
  • Euresys Coaxlink Duo CXP-12
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output, 24 V DC, 1 µs, 0.5 A, multi-timestamp
  • Beckhoff EL1258 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, multi-timestamp
  • Beckhoff EL1252-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0010 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs, timestamp
  • Beckhoff ELX1058 | EtherCAT Terminal, 8-channel digital input, NAMUR, Ex i
  • Beckhoff ELX1054 | EtherCAT Terminal, 4-channel digital input, NAMUR, Ex i
  • Beckhoff EK/EC1xxx, BK1xx0 | EtherCAT Couplers
  • Beckhoff BK1150 | EtherCAT Compact Bus Coupler
  • Beckhoff BK1120 | EtherCAT Bus Coupler for standard Bus Terminals
  • Beckhoff EK1960 | TwinSAFE Compact Controller
  • Beckhoff EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os
  • Beckhoff EK1828-0010 | EtherCAT Coupler with integrated digital outputs
  • Beckhoff EK1828 | EtherCAT Coupler with integrated digital inputs/outputs
  • Kollmorgen Stainless Steel AKMH Series
  • Kollmorgen AKME Series Servo Motors
  • Kollmorgen Essentials™ Servo Motors
  • Kollmorgen Essentials Motors Offer High Performance at an Exceptional Value
  • Kollmorgen Essentials Drive: Plug In. Power Up. Perform.
  • Kollmorgen The Benefits of the Essentials Servo System
  • Kollmorgen AKM2G represents the latest evolution of the industry-leading AKM motor family
  • Kollmorgen AKM® 2G Servo Motors
  • Kollmorgen New AKD2G 24A Drive
  • Kollmorgen Automation Suite™ Motion in Minutes
  • Kollmorgen 1G Motion System
  • Kollmorgen Essentials™ Motion Systems
  • Woodward Gas Stop/Ratio Valve
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
How to install and debug this product? Matters needing attention
Where can I download the manual and programming software?
Is it in stock or need to be ordered?
Can you provide technical service?
Where can I order this series?
Do you have product selection list and pre-sale service?