Emerson KL2002X1-BD1 PK1500 Controller

Benefits

I/O anywhere you need it: DeltaV CIOC provides an unprecedented flexibility in control system I/O topology.

Using standard Ethernet infrastructure hardware you can add I/O anywhere you need it. From a local I/O cabinet to

remote enclosures miles away, simply install the hardware and connect it to the DeltaV control network. Each I/O card

can serve I/O signals to any four controllers in the system with 50-ms updates for fast, reliable control.

Single channel granularity: The CHARM I/O architecture allows each individual channel to be characterized for the

requirements of the field device. Any instrument signal can be wired to any terminal block. The channel is then

electronically marshalled by installing the appropriate CHARM and assigning the channel to one of four

controllers. Home run multi-core instrument cables can be landed in order on a series of CHARM terminal blocks

without concern for signal types.

Reduces installed cost of system: DeltaV Electronic Marshalling helps reduce overall system costs by

eliminating internal cabinet cross wiring, reducing overall footprint, simplifying I/O channel assignments, and

reducing Factory Authorized Testing activities. Electronic Marshalling provides separation between I&E hardware

installation schedules and control strategy development.

Wiring can begin earlier knowing any late changes can be done without lifting a wire. Separation of the

controller and I/O allows more efficient cabinet designs and accommodates late scope changes you can add I/O

anywhere. Adding additional control capacity does not require re-wiring I/O. Simply assign the control modules

and their I/O signals to the new controller, without lifting a wire.

Recommended Products P/N：

S-series Sequence of Events Card

SOE interface with 32-screw termination block SE4001S5T2B4

SOE interface with Mass term block Connector SE4001S5T2B5

S-series Horizontal Carriers

Carrier Blank Cap (for 8-Wide I/O Interface Carrier only) SE6101

Carrier Blank Cap (for 2-Wide Power and Controller Carrier only) SE6102

Left Extender 1-Wide KJ4005X1-BB1

Right Extender 1-Wide KJ4005X1-BC1

Single Carrier Extender Cable 0.4m (17in) KJ4003X1-BH2

Single Carrier Extender Cable 0.8m (31in) KJ4003X1-BH3

Single Carrier Extender Cable 1.1m (43in) KJ4003X1-BH1

Single Carrier Extender Cable 1.5m (58in) KJ4003X1-BH4

Single Carrier Extender Cable 1.9m (77in) KJ4003X1-BH5

Power Terminal Plug for 2-Wide and 8-Wide Carriers KJ4005X1-BF1

Power Buss Plug for 8-Wide Carriers KJ4005X1-BG1

Power Terminal Plugs for 2-Wide and 8-Wide Carriers; package of 8 plugs SE6197

Power Buss Plugs for 8-Wide Carriers; package of 8 plugs SE6198