IC698CPE030 PACSystems RX7i controller

The IC698CPE030 is one of the most advanced Central Processing Unit (CPU) from the PACSystem RX7i of Programmable Automation Controllers (PAC). This CPU is designed to meet the modern automation, connectivity and integration requirements of the industry. It is formerly manufactured by GE Intelligent Platforms (GE IP) however with the recent acquisition by Emerson Automation, the PACSystem RX7i is now part of the latter. The IC698CPE030 processor is installed with a computer level microprocessor that is, 600MHz Pentium-M microprocessor with 64 MB of user memory and 64 MB of user flash memory. It exhibits Boolean execution speed of 0.069ms per 1000 Boolean contacts/coils. This CPU can accommodate up to 32 K bits of Discrete I/O and 32 K Words of Analog I/O. Up to 512 program blocks can be downloaded to this CPU wherein each program block can have a maximum of 128 KB memory. The IC698CPE030 also has Two (2) Ethernet communication ports that is capable of auto-sensing of network transmission speed and may be configured for half and full duplex operating mode. The built-in Webserver and File Transfer Protocol (FTP) functionality is accessible via these ethernet ports, allowing users to remotely monitor and configure the processor. Aside from the built-in Ethernet ports, this CPU also has One (1) RS232 port; One (1) RS485 port and One (1) Station manager port. These communication interfaces support SRTP, Modbus TCP Server and Client, Ethernet Global Data (EGD) for Ethernet based communication and Modbus RTU Slave, SNP, Serial I/O for serial communication.

Features

It is compatible with ControlST versions 7.02.00C and later.

The PUAA enables users to use fewer panels and have a smaller system footprint by providing black sections that can be independently wired, enabling channel-by-channel commissioning. The module has sixteen analog Simplex channels.

The frame rate is 10ms. Auto-reconfiguration is possible. The unit can be hot-swapped for a replacement. It is intended to operate in temperatures ranging from -40 to 158 degrees Fahrenheit with relative humidity ranging from 5% to 95%. Within the specified temperature range, the normal scan time is 5 ms and the measurement accuracy is better than 0.1%.

Supported I/O Types

Thermocouple

RTD

4-20 mA current input with HART option

� 5 V or � 10 V input

0-20 mA current output with HART option

Digital inputs and outputs

Pulse accumulators

Incoming Power Consumption