FOXBORO Compact FBM215 HART® Communication Output Interface Module OVERVIEW

OVERVIEW

The Compact HART Communication Output Interface Module (FBM215) contains eight channels of isolated output channels.

The Compact FBM215 supports any combination of standard 4 to 20 mA devices and HART devices,

and is part of the Compact 200 Series I/O Subsystem, as described in the Compact 200 Series I/O Subsystem Overview.

The Compact FBM215 serves as a host for HART-communicating field devices, allowing the Foxboro

Evo system to request and receive two digital telegrams per second from each field device.

The Telegram Pass-Through feature can be used to support HART generic, common, 

and device-specific commands, but does not support burst communication modes.

These commands are implemented through the Intelligent Field Device Configurator 

(IFDC - see Intelligent Field Device Configurator FoxCom for details) and the HART protocol.

The compact FBM215 provides an isolated power supply for each channel.

When connected to the appropriate TA, the Compact FBM215 provides the functionality previously provided by the 100 Series FBM I/O subsystem.

TAs support the functional HART devices of the 100 Series FBM37 when the FBM37 is used with the following devices

Compact Design

The compact FBM215 has a narrower design than the standard 200 series FBM.

It has a rugged acrylonitrile-butadiene-styrene (ABS) housing that provides physical protection for the circuitry.

Enclosures specifically designed for mounting the FBM provide varying degrees of environmental

protection up to the harsh environments specified in ISA Standard S71.04.

Visual Indicators

Light emitting diodes (LEDs) on the front of the module provide a visual indication of the module's operational status and channel communication activity.

Easy Removal/Replacement

Modules are mounted on a Compact 200 Series base plate that can be mounted either on DIN rails or horizontally in a rack using a kit.

Includes signal connectors for redundant fieldbus, redundant independent DC power supply and termination cables.

Two screws on the FBM secure the module to the Compact 200 Series base plate.

Removing/replacing the module eliminates the need to remove field device termination cables, power supplies, or communication cables.

Termination Components

Field output signals are connected to the FBM subsystem via DIN rail mounted TAs.

Related Product Recommendations:

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF8C Analog Output Module

ILX56-MM Message Manager for Industrial Communications

5X00419G01 Ethernet Link Controller

1769-PB4 Power Module

IC660TBD025 GeniusI/O Terminal Assembly Module

BSFC-01C Charge Controller Board SP Kit Gate Driver Boards

BSFC-02C Charge Controller Universal Brake Chopper

DS200DSPCH1ADA Word Signal Processor Control Board

1769-OF2 Analog Output Module

CA5-01 Auxiliary Contacts Front Mounting Block Screw Clip