ABB Power Factor Controller RVT Distinct features

Distinct features

Power factor correction for both balanced and

unbalanced loads

In modern day installations, unbalanced loads are increasingly

common, especially in residential or commercial buildings.

RVT addresses your power factor issues from both single

phase loads (L-L or L-N) and three phase balanced/

unbalanced loads. RVT is capable of compensation to

each phase individually or compensation to three phases

globally. Another distinct feature of RVT is individual phase

measurements and energy calculations.

Complete three phase measurements

− Active power (kW) - 3ph/1ph

− Apparent power (kVA) -3ph/1ph

− Reactive power (kvar) -3ph/1ph

− Reactive power (kvar) to reach the target cos ϕ -3ph/1ph

− Voltage (V) -3ph/1ph

− Current (A) -3ph/1ph

− Cos ϕ-3ph/1ph

− Total Harmonic Distortion on Voltage/Current : THD V/I (%)

− Voltage/Current Harmonics : H2 up to H49 (%-spectrum)

Touch Screen

3.5 inch colorful QVGA touch screen eases your parameter

settings.

Ethernet connection

With ABB PQ Link software, you may easily plug an RJ

45 to RVT and communicate with the controller through a

10/100BASE-T interface anywhere in the world.

USB connection

RVT supports USB2.0 connection; which makes it possible to

connect to a computer via a widely used USB cable to access

all RVT parameters.

Up to 8 Temperature alarm outputs

RVT can monitor 8 hot spots in your bank through eight

daisy-chain connected temperature probes.

Real time clock

RVT real time clock tracks and logs date and moment of each

alarm and event.

Hardware and software lock

Both hardware and software locks are equipped in the RVT

for bank setting protections from any unauthorized access.