Emerson M-series Virtual I/O Module 2 EtherNet/IP

EtherNet/IP

The VIM2 with the EtherNet/IP Driver provides the following

compatible functions using the Common Industrial Protocol

(CIP) as defined in the EtherNet/IP Specification from

Open DeviceNet Vendor Association (ODVA) and ControlNet

International. The driver emulates either Programmable

Serial cards or DeviceNet cards on the DeltaV I/O bus.

The VIM2 EtherNet/IP Scanner Driver provides:

I/O Scanner (Transport Class 1 originator,

using connected implicit messaging).

I/O Adapter (Transport Class 1 target, using connected

implicit messaging).

Unconnected explicit (UCMM) messaging client.

Connected explicit (Transport Class 3 originator) messaging client.

PROFINET

The VIM2 with the PROFINET Driver acts as an I/O

Controller in a PROFINET network, exchanging data with

I/O Devices using Real-Time (RT) messaging. Isochronous

real-time (IRT) communication is not supported. The driver

supports the PROFINET v2.2 specification and emulates

Profibus DP cards on the DeltaV I/O bus.

Field device communications comprise I/O data, alarms,

and diagnostics. Other aspects of field data, e.g., data

records and logbook information, are not supported.

Alarm and diagnostic data are reported to PC-based

VIMNet Explorer tools. Only I/O data and corresponding

status are reported to the DeltaV controller.

Additional Integration Options

Please review the PK Controller and Ethernet I/O Card

(EIOC) product data sheets for additional Industrial

Ethernet protocol integration options.