Uniop ERT-16 Industrial PLC Workstation Security

Security

An eight-level password protection scheme protects critical system features from undesired access.

Alarms

UniOP can monitor and display up to 1024 alarms. Attributes and unique messages for each alarm can be defined.

Operator acknowledgment can also be required.

The last 256 alarm events detected by the PLC are retained in an internal event list.

This list can be viewed on screen or printed on a serial printer to obtain a permanent record.

Adaptability

Custom display screens are developed using the UniOP Designer™ for Windows™ programming software.

Your completed project file can be downloaded to the display through the serial port and permanently stored in a Flash EPROM.

Graphic Capabilities

The ERT-16 allows you to display bitmap graphics. These bitmap graphics can be

created with any Windows™ based software package capable of BMP format.

Keyboard Macro Editor

A feature that allows you to configure your touchcells to do a variety of functions locally in the UniOP.

For example: turning pages, setting attributes, setting LEDs, writing to PLC, going to alarm list,

uploading or downloading a recipe set and many more. This can save many hours of ladder logic programming.

Recipes

This feature allows you to create a recipe with up to 255 parameter sets for each page of the project file.

UniOP has a total of 16K reserved for recipe storage. You can upload or download a parameter set from or to the PLC.

Once a parameter set has been downloaded to the PLC, the data contained within the parameter set can be modified.

UniNET Network

The UniNET network allows you to design networks of varying configurations;

from two panels with one PLC to multiple panels with multiple PLCs.

Data can be written to or retrieved from the PLCs in many different locations at one time.

The UniNET network creates a bridge between UniOP panels which allows

data to be shared by all PLCs in the network, regardless of the type or manufacturer.