Emerson DM6312 Isolated Analog Input 0-10 V Card

While the SLS 1508 Logic Solver is rated suitable for use in SIL 3 applications

in simplex mode, it is installed in redundant pairs for increased process availability.

Redundant SLS 1508 Logic Solvers run in parallel at all times.Both read the inputs

from the I/O terminals, both execute the logic and both drive the outputs at the I/O terminals.

There is no concept of primary and backup or master and slave,which is unlike any other SIS.

The only difference between the two is that one communicates with both the engineering

and operator workstations and the dedicated safety network (SISNet);

this is the one with the Active light on the bezel.The other (Standby) is

communicating only on the SISNet.In the event that a failure is detected in

one of the SLS 1508 Logic Solvers, it automatically goes to a failed state. 

In this condition, all its output channels are de-energized;

this has no impact on the other SLS 1508 Logic Solver or the physical

outputs because the other SLS 1508 Logic Solver continuesto read inputs

execute logic and drive outputs. The transition from redundant to simplex

mode is therefore completely bumpless.

The health and status of both SLS 1508 Logic Solvers and their channels are

available in the diagnostics explorer.

When one of a redundant pair of SLS 1508 Logic Solversis removed online there

is no disturbance to the process.

When the missing SLS 1508 Logic Solver is replaced with another SLS 1508 Logic Solver,

the new SLS 1508 Logic Solver completes its power-up self-tests before the

active Logic Solver cross-loads the current database.

In safe areas, failed SLS 1508 Logic Solvers can be replaced under power.

In hazardous areas,appropriate installation procedures must be followed.

Automatic proof testing can be selected on a redundant pairof SLS 1508 Logic Solvers.

The desired proof-test interval is set in the configuration and the SLS 1508 Logic Solvers perform

the proof test automatically. A warning is given to the operator before

the automatic proof test is started.

GE IC754CSX06CTD QuickPanel HMI Most Favorable

GE MVR1600-4601 Air-cooled rectifier module

GE ITM11A8XJ036645 Industrial Control Module 

GE VG5SK8I052311 PM0N2000 Digital Input Module

GE HWA143-TDM-PMC-V20 Industrial TDM Module

GE ESM10A Industrial Control Module 

GE IS200SPROH1AAB MRP663860 Turbine Protection Relay Module

GE IC698PSD300 Power Supply Module

GE V7668A-1310B0 350-9310007668-131020 

GE VME-PMC-CADDY VME-Carrier Board 

GE EVPBDP0001 EVPBDP032 Controller Module

GE IS420ESWBH3AX IONET Switch Module