Aerotech ASR1400 Mechanical-Bearing Direct-Drive Rotary Collet Stage

Outstanding Dynamics & Versatility

Aerotech’s ASR1400 direct-drive rotary collet stage

combines high-dynamic performance with broad workpiece

capacity, accommodating tube diameters from 200 µm to

15 mm. A high-precision TF20 dead-length collet prevents

axial tube shift during regripping to reduce stitching errors

and improve part reproducibility. Workpieces can be loaded

from the front and rear of the stage to support automated

part handling, and internal seals protect against the ingress

of process debris & other contaminants. The result: faster

processing, greater versatility and lower production costs.

Integral Rotary Union

Air is delivered to the collet or gripper assembly through an integral rotary

union using a seal-less, frictionless design. This 100% noncontact rotary-

union design ensures a lifetime of maintenance-free operation.

The combination collet chuck and rotary union assembly also has significantly

less friction and inertia than external assemblies created from discrete parts.

This reduced inertia improves system performance by allowing higher peak

acceleration and reducing position error during laser machining operations.

Reduce Output-Switching Noise

The MFM Motor Filter Module reduces conducted line noise

generated by pulse width modulation (PWM)-switching servo

amplifiers. Use the MFM with our Automation1 XC4e, XC2e,

XC4 and XC2 servo motor drives.

The Enhanced Throughput Module (ETM) improves the positioning

performance of high-dynamic motion systems by directly measuring

the unwanted motion of the machine base and communicating it back

to the controller. By working in concert with the Dynamic Controls

Toolbox and the Aerotech controllers, ETM allows the servo system to

do a superior job of executing the desired motion path.

High Precision ER Collet

The collet chuck on the ACS 100LP accepts an ER8 series collet, while

the ACS 150LP uses an ER25 collet and the ACS 200LP uses an ER40

collet. These collets are readily available from machine tool component

suppliers in sizes that support tube diameters from 0.5 mm to 30 mm.

ER collets provide excellent run-out characteristics for applications 

requiring high-precision gripping of tubular material. The collet is

retained with a threaded retaining nut that enables quick changeover,

and is configured in a “fail-safe” normally-closed mode where full

clamping force is applied when no air pressure is present.

Compact Package

The design of the ACS LP series direct-drive rotary stage was optimized

to minimize stage height. The low profile of the stage reduces the effective

working height of the system minimizing “stack-up” related errors.