Woodward V90TD-3040-MBE 9907-1798 Industrial Turbine Actuator

The overspeed test function is activated when the key switch is in the

PROGRAM position and the operator presses and holds the OVSP TEST button

on the touch pad. The microcontroller switches the source of the MPU signal

from the MPU input to an on-board oscillator. The test speed is annunciated on

the LCD. If the test speed is adjusted above the trip setpoint, using the Test

Frequency potentiometer on each unit, a trip occurs.

MPU loss-of-signal checking is disabled, and the peak speed value does not change during

overspeed test. When the OVSP TEST button is released, the microcontroller

switches the source of the MPU signal back to MPU input and normal operation

is restored. Each ProTech unit must be reset to clear its trip condition.

Hardware Faults

If the microcontroller determines that the EEPROM is not responding correctly, a

trip occurs. The trip cause is annunciated as a hardware fault. If this type of fault

occurs, reset the unit. If the fault continues to occur, replace the unit and return it

for repair.

If the microcontroller determines that the data in EEPROM has been corrupted,

the display shows "eeprom data lost". If this type of fault occurs, reset the unit. If

the fault continues to occur, replace the unit and return it for repair.

SIEMENS MOORE APACS + SDM+ - 39SDM048DCCBN

SIEMENS 15756-8-5 / 1575685

SIEMENS MOORE QUADLOG CDM - QLCDM048DCBAN

SIEMENS 6EQ1131-1AF00- 0BA0 CRITERION 900 RGI INPUT,MOORE 13935-12,13919 12,AE

SIEMENS MOORE 16436-1-03 SDM/CDM MARSHALLED TERMINATION MODULE

SIEMENS MOORE PROCESS CONTROL BOARD 352EA21NNF

SIEMENS MOORE INDUSTRIAL COMPUTER MODULE 16194-21/05 39ICM411NAN

SIEMENS 42H100 / 42H100

MOORE RTM 39RTMCAN  / 16207-61R/10  RESISTANCE TEMPERATURE  MODULE

Moore, Siemens A5E00282171/13   QLVIMBCN VIM  Voltage Input Module

SIEMENS Moore SDM+ Standard Discrete Module  QLSDM024DCABN 16101

Moore, Siemens | 16139-218/1  39ACM28AEN ACM+ -Advanced Control Module