The EL2068 digital output terminal connects the binary control signals
of the automation device to the actuators at process level with electrical
isolation. This EtherCAT Terminal contains eight channels, which display
their signal status by means of LEDs. The integrated diagnostics can be
evaluated in the controller and are indicated by the LEDs. A diagnostic
bit is set for the affected channel if there is an overload.

The diagnostics serve to simplify the maintenance of the application.
In the EL2068. the outputs are supplied via the 24 V power contact.
The power contacts are looped through.
Special features:
• connection of different load types possible (resistive, inductive, lamp load)
• max. output current of 0.5 A per channel
• short-circuit proof outputs and reverse polarity protection
• integrated diagnostic possibility overload
• parameterizable output behavior in case of bus error (safe state)
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved