The EL2044 digital output terminal connects the binary 24 V DC
control signals from the automation device on to the actuators at
the process level with electrical isolation. The EtherCAT Terminal
contains four channels that indicate its signal state by means of
light emitting diodes. The integrated diagnostics can be evaluated
in the controller and is indicated by the LEDs. Maintenance of the
application is simplified by the diagnostics. The power contacts are
connected through. The reference potential of the outputs is the
0 V DC power contact. The outputs are supplied via the 24 V DC
power contact.

Special features:
• connection of different load types possible (ohmic, inductive, lamp
load up to 24 W)
• max. output current 2 A per channel
• overload and short-circuit proof outputs and reverse polarity protection
• integrated diagnostics option, including
• short-circuit detection per channel
• line break detection per channel
• overcurrent per channel
• overtemperature
• voltage loss and undervoltage
• parameterizable output behavior in case of bus error (safe state)
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved