Beckhoff ED2034 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, push-in, with channel diagnostics

The ED2034 digital output terminal connects the binary control signals

from the automation device on to the actuators at the process level

with electrical isolation. The EtherCAT Terminal contains four channels

whose signal state is indicated by light emitting diodes (status LEDs).

An overload detected by the integrated diagnostics can be evaluated

in the controller and is also indicated by LEDs. A diagnostic bit is set

for the affected channel if there is an overload. The diagnostics serve

to simplify the maintenance of the application. The power contacts

are looped through.

In the ED2034 the outputs are supplied via the 24 V DC power contact.

They are electrically isolated from the fieldbus side.

Special features:

• suitable for controlling different types of loads:

• resistive loads (e.g., resistors)

• inductive loads (e.g., relays, contactors, valves)

• capacitive loads

• max. output current of 2 A per channel

• integrated diagnostic option: overload

• short-circuit proof outputs: protection against overload or short circuit

• reverse polarity protection in the event of incorrect polarity of the supply

voltage

The ED series EtherCAT Terminals have push-in connection technolog

which makes wiring easy and tool-free.